
In Stock
40W Tricolour 1200mm Batten LED
☆☆☆☆☆
R 300.00
$18.03
40W Tricolour 1200mm Batten LED – 3000K / 4000K / 6500K – One light, three colour temperatures, loads of uses around the grow room. This batten-type LED fixture is a 1.2m ultra-slim LED that switches between Warm White (3000K), Natural White (4000K) and Cool White (6500K).
Purchase directly from Hydroponic.co.za40W Tricolour 1200mm Batten LED – 3000K / 4000K / 6500K – One light, three colour temperatures, loads of uses around the grow room. This batten-type LED fixture is a 1.2m ultra-slim LED that switches between Warm White (3000K), Natural White (4000K) and Cool White (6500K). That flexibility makes it a handy, low-cost utility light for growers who want to put the right kind of white light exactly where they need it.
How growers can use it
Cloning & propagation (Cool White – 6500K): Cool white light is a popular choice for cuttings, clones and young seedlings. With 4400 lumens spread over a wide 120° beam, a single batten gives even coverage over a propagation tray or shelf.
Side lighting (Warm White – 3000K): Mount it vertically along the side of your space to add supplementary light to lower branches and the sides of the canopy that your main light struggles to reach.
Work & inspection light (Natural White – 4000K): A neutral, clean white for checking plants, mixing nutrients, or lighting up your grow room, shed or workbench.
Underlighting – only with care: Some growers use battens beneath the canopy. This fitting is rated IP20 and is NOT water- or moisture-resistant, so only consider this in conditions where it is fully protected from water, drips, run-off, spraying and splashes. See the safety notice below.
40W Tricolour 1200mm Batten LED Features
Tricolour selectable: Choose 3000K, 4000K or 6500K from one fitting – no need to stock three different lights.
Efficient output: 40W delivering 4400 lumens at 110lm/W, with a power factor above 0.9.
Wide, even spread: 120° beam angle from high-quality SMD 2835 LED chips, CRI >80.
Ultra-slim & lightweight: Just 25mm deep and 263g, with a durable single-piece, extruded PC (polycarbonate) housing – easy to fit in tight spaces. (Front facing light-diffuser is part of the extrusion and cannot be removed)
Long life: Rated for 25 000 hours.
Built-in protection: 1kV surge protection helps guard against power spikes.
Cable Connect wiring: Comes with electrical cord for faster installation. (Always wire up responsibly)
40W Tricolour 1200mm Batten LED Specifications
Power: 40W
Lumen output: 4400lm (110lm/W)
Colour temperature: 3000K / 4000K / 6500K (Tricolour)
LED type: SMD 2835
CRI: >80
Beam angle: 120°
Voltage: 180–240V AC
Power factor: >0.9
Surge protection: 1kV
Rated life: 25 000 hours
IP rating: IP20 – indoor, dry locations only
Housing: PC (polycarbonate)
Dimensions: 1200 × 76 × 25mm
Weight: 263g
Connection: Cable Connect
In the box: Mounting brackets, screws & plugs (Please note these are stuck into one of the two carboard ends of the packaging!)
Warranty: 1-year limited manufacturer’s warranty
⚠️ Important safety notice
This light is rated IP20, which means it offers no protection against water or moisture. Keep it well away from reservoirs, trays, run-off, misters, foggers and anywhere it could be sprayed, splashed or dripped on. Grow tents and rooms can get very humid, so position it with care and never use it in wet or condensing conditions. Mains-voltage wiring should be done by a qualified electrician.






