Twister T4 PRO VSC Stainless Steel Trimming Machine with Leaf Collector Vacuum and Standard Tumbler – Standard Tumbler - (1/4" Slots) / Standard - Leaf Collector

The Same Great T4 Trimming Machine In Stainless Steel Twister created a pharmaceutical and food-grade stainless steel version designed specifically for continuous harvest cycles and high cleanliness environments. The Twister T4 Stainless Steel makes it easy to maintain compliance with the most rigorous health and sanitation standards. We’ve made an already easy to clean machine, even easier! With it’s minimal, easy to wipe down design and the ability to withstand direct high-pressure washing and harsh chemicals, the T4 Stainless Steel option minimizes effort and time spent cleaning. The T4 Stainless Steel uses high-end Swedish bearings that require no greasing, are sealed for life and designed specifically for high-performance, continuous duty cycle environments. Trim Wet or Dry! Dry Trimming? Dry flower is lighter, more fragile and can be difficult to dial in the ideal 10-13% moisture content for optimal trimming. Reducing the tumbler speed and vacuum suction will allow a more gentle & softer trim, enabling you to trim even those low-density, delicate flowers you used to hand trim. Wet flower is denser and more flexible because of its higher moisture content. This makes it more resilient when trimming and allows the choice to increase the blade and tumbler speed to maximize blade contact to achieve a tighter trim. Hand trim quality with machine trim speed Achieve a gentle and softer trim Reduce flower wall crawl and time in the tumbler Trim low-density flower you used to hand trim With six settings each for both the tumbler and the blade, the new T4 standard with Speed Control gives you thirty-six trimming styles in one quality machine. Set your trim settings to your harvest liking. Optional Upgrade: Twister Trim Saver Select between the standard Leaf Collector Vacuum or the upgraded Trim Saver Vacuum The Trim Saver™ is a revolution in trim collection and preservation and provides maximum separation efficiency of trim, collecting over 90% of your product in a food-safe, easy to clean, stainless steel collection bin. The Trim Saver™ uses radial cyclone technology to collect your valuable trim, effectively bypassing the impeller used in traditional vacuum-based trim collection systems to provide extract ready trim to maximize your revenue. Optional Upgrade: Run Multiple Trimmers with Rail & Conveyors Create a double or triple T4 system with multiple T4 Trimming Machines and Twister Conveyors & Rails Run in configurations up to 3 in a row, for a total production speed of up to 78 lbs/hr! Start with one, add a second, and when you’re ready slide in the third. No additional labor required! Single T4Up to 23 lbs/hr Double T4Up to 51 lbs/hr Triple T4Up to 81 lbs/hr Wet: 23 lbs/hr (11kg/hr) Dry: 7 lbs/hr (3 kg/hr) Wet: 51 lbs/hr (23kg/hr) Dry: 16 lbs/hr (7 kg/hr) Wet: 81 lbs/hr (37kg/hr) Specifications for the Twister T4 Pro Trimmer Input Voltage 115V, 60Hz Current Draw 2A Blade Motor 200W / 0.25HP Tumbler Motor 6W / 1/125HP Connector (Plug) NEMA 5-15P Weight 90lbs / 40.8kg Shipping Weight 115lbs / 52.1kg Length 25in / 63.6cm Width 15in / 38.1cm Height 16.5in / 42cm Specifications for the Twister T4 Leaf Collector Input Voltage 115V Motor 1HP Amps (running) 10A Amps (startup) 53A Motor Speed 3450 RPM Airflow Capacity 1190 CFM Static Pressure 6.45in of H20 Impeller 10"/25.4cm Inlet (cyclone) 5½" / 139.7mm Height 19in / 48.3cm Weight 58lbs / 26.3kg Circuit Breaker Required 15A / 120V Connector (plug) NEMA 5-15P Sound Rating 77 db Fused Yes Maintenance Clean impeller housing. Replace filter bag. Specifications for the T4 Trim Saver Input Voltage 120 Volts Motor 1.5 HP Amps (running) 15 Amps Amps (startup) 47 Amps Motor Speed 3450 RPM Airflow Capacity 1190 CFM Static Pressure 6.5 in H2O Impeller 10"/25.4cm Operating Conditions 950A CFM @ 6" W.G. Height 62in / 28.1cm Circuit Breaker Required 20A / 120V Connector (plug) NEMA 6-20P