NanoLux DE Chill APP 1000 Watt Air-Cooled Grow Light Fixture with DE HPS Lamp – 277 Volt

The Nanolux DE Chill is the first DE commercial overlap fixture of its type on the market. The DE Chill is designed with an onboard ballast, is air-cooled, and comes NCCS APP-ready. The air-cooled design removes up to 60% of heat load in grow facility environments. This greatly reduces the air conditioning required to maintain the growing environment at desired temperatures. The fully enclosed design uses an optical quality glass lens which only reduces light output by 6%. This 6% reduction is easily offset by the ability to lower your lights closer to your plants and therefore raising light intensities far above 20%. If left at the same height, one would only require 104 lights in a facility that would regularly require 100 open-style DE lights. The 4000W required to run the 4 additional lights and the small wattage draw for exhaust fans is minor compared to the savings from lower electrical consumption required to AC the grow room. Features: 6 Dimming Settings 600 – 1200W Overdrive Powder Coated Steel Construction Fully Gasketed Lamp Change Door 3 Year Warranty Low Light Loss Tempered Glass Airtight Soldered Joint Construction Uses any 2100umol DE HPS Lamp. Will also fire any DE MH lamp 8" DUCT SIZE NCCS APP Ready NanoLux NCCS APP Data Transfer Unit The Nanolux cloud control system was designed and engineered to provide a complete solution for the control of the lighting and environmental controls of a grow room. The NCCS system allows for precision control of all devices in a grow room through its simple and intuitive software. At the heart of the NCCS is a software program that allows you to specify all of the parameters of your lighting and environmental control settings in your room. The program is then downloaded from your computer to the Data Transfer Unit (DTU). The DTU is the brain of the system and communicates and controls all of the selected functions in the grow room through wireless modem communication. The DTU controls lighting ballasts and environmental control devices by communicating with individual RTU (remote terminal unit) USB devices. The NCCS system currently allows for precision control of your lighting system with dimming, multiple lighting areas, high-temperature dimming features along with fan control. The NCCS will be adding C02 functions, humidity and temperature control, pH and nutrient control, pump control and remote camera features in the near future. Specifications: Output Power: 1000 Watts Input Voltage: 120-240 Volts / 277 Volts Input Current: 10.3-5.1 Amps Bulb: Double Ended Dimming Settings: 600 - 1200 Watt Power Factor: > 0.99% THDI: < 10 % CF: < 1.7 Weight: 23 lbs. Size: 23.2" x 13.4" x 9.9" Frequency: 50/60 Hz