GardnClean Liquid Mix Chlorine Dioxide (CIO2) Disinfectant & Sanitizer – 2 Gallon

Best In Class Chlorine Dioxide Sanitizer, Disinfectant, Line Cleaner + Continuous Water Treatment Gard'nClean GC Liquid works by releasing chlorine dioxide gas into the solution once the sachet is added to water. The generation vessel and storage container must be sealed to prevent the ClO2 gas from escaping. Available Sizes: 2 Gallon – Makes 2 Gallons of 100 ppm Solution 12.5 Gallon – Makes 12.5 Gallons of 100 ppm of Solution 30 Gallon – Makes 30 Gallons of 100 ppm of Solution The Ideal 3-Dimension Sanitation & Disinfection Product for Cultivation & Processing Facilities Effective against Fusarium, Pythium, Powerdy & Downey Mildew, Botrytis Gray Mold, Tobacco Mosaic Virus, Hop Latent Virus & many more Ships and stores dry Generates ultra-pure ClO2 and zero byproducts Liquid lasts for up to 60 days after generation (if stored properly) Versatile use - replaces an entire cabinet of harmful products Mechanical kill action, no resistance or tolerance possible Kills E.coli in 60 seconds at 5ppm No rinse or wipe required, spray and walk away Benefits of Ultra-Pure Chlorine Dioxide Until recently, chlorine dioxide generation required large mechanical equipment that came at a huge expense, required intimate contact and handling of toxic precursor chemicals, and specially trained (and highly paid) operators. Gard’nClean and its patented just-add-water technology require only tap water to generate pharmaceutical-grade ultra-pure chlorine dioxide (ClO2) on-site. No hazardous chemicals or byproducts to interact with, no expensive infrastructure to purchase and maintain, and no special operators needed. Gard’nClean revolves around our patented sachet-based micro-reactor that allows anyone to safely and easily generate ultra-pure chlorine dioxide (ClO2) as a versatile liquid product, or as a direct gas application at the point of use. 99% Pure Our eco-friendly technology is OMRI organic, requiring no special disposal or handling requirements. The activated solution has a neutral pH. Effective 99.9% pure CIO2 is an oxidizer plant pathogens are unable to build up a tolerance. It is effective against a wide variety of dangerous microorganisms. Gentle Unlike other disinfectants, there are no corrosion concerns at use levels. CIO2 is safe to be used on food, water, and in food preparation areas. Compare The Entire Gard'nClean Product Line All of Gard’nClean’s products harness the power of ultra-pure chlorine dioxide. We have developed three different delivery systems to provide a comprehensive system, unlocking the true potential of this amazing molecule. Extended Release A cutting Edge Humidity Activated Space Cleaner Which Lasts Up To 30 Days. Compliant With OSHA & EPA Chronic Exposure Limits Humidity Activated Lasts For Up To 30 Days Eliminates Odors 3-Dimensionally No PPE Required Safe To Use Around Plants Fast Release A Revolutionary Deep Dry Gas Fumigation System For Enclosed Environments. Just Add Water Activation Fast-Acting 3-Dimensional Gas Treatment Discard Excess Liquid Down Any Drain Complete Environmental Deordorization As Little As 4 Hours Treatment Time The Sachet Is Landfill Friendly Liquid A Replacement For Sanitizers, Disinfectants, Deodorizers, Fungicides & Bactericdies ++ On EPA List Of Disinfectants OMRI Listed For Organic Use No Rinse Required, Just Spray And Walk Away Non Dermal Sensitizer; No PPE Required Generates Ultra-Pure ClO2 Registered Kill Claims For Influenza, Rotavirus, Rhinovirus, E-Coli, Salmonella, MRSA, Norovirus, Pandemic H1N1 and Sars-Cov-2 (Covid19) Directions For GC Liquid: 1. Generate the Gard’nClean GC Liquid solution with the provided Gard’n Clean GC Liquid sachet by adding the sachet to water for a minimum of 2 hours, a maximum of 12 hours, in a sealed container. 2. Remove the used Gard’n Clean GC Liquid Sachet from the mixing container and discard in a standard trash receptacle. 3. We recommend transferring the solution to a sealed, opaque container with a spout for easy dispensing. The solution will stay ph & ppm stable for up to 60 days if stored properly. 4. For disinfection, use a 100 ppm solution to spray, wipe down or mop all surfaces. * For disinfection of large spaces, we recommend using an electrostatic sprayer or dry fogger.* GC Liquid Usage Rates Disinfection/Decontamination/Sanitation/Deodorization – 100 ppm Heavy Bleach Replacement – 25 ppm General Surface Cleaning/Bleach or isopropyl Alcohol Replacement – 10 ppm Wash Protocol for Fruits/Vegetables – 5 ppm Water Treatment (Continuous Dose) – .25 ppm For full instructions, see our Directions for Use on the label, or consult the Gard’nClean Institutional SOP.