Dosatron Etatron eOne Micro-Dosing Pump - Assembled Panel – 3/4 Inch - Right to Left

The Etatron eOne MF Micro-Doser Kit with water meter and pressure relief valve can accurately inject super-concentrated products and can be integrated into an existing fertigation system. **Note:Tank in images NOT included The eOne MF is a multifunction microprocessor dosing pump, suitable for applications that require proportional dosing. The pump operates at a dosing frequency up to 180 impulses/minute and is equipped with a backlit graphic display for the correct setting of the various programming parameters. It has a flow rate of 0.26 gph and a max pressure of 1.45 psi. This kit can work in combination with a Dosatron Water-Powered NDS, or as a stand-alone solution, to provide the ultimate in reliability and functionality in one system. Connections 1.5" NPT. Included eOne MF 0110 pump, polyethylene panel, PVC suction tube, PVC priming discharge tube, polyethylene discharge tube, water meter, check valve, pressure relief valve, injection valve, unions, foot filter, and mixing chamber. Choose the size and orientation that works best for your setup. *Tank in image not included Applications include dosing acids (pH down), caustics (pH up), plant health additives, and water treatment products. Ability to micro-dose down to 0.1 mL per gallon, depending on flow rate. Included eOne MF 0110 pump The eOne MF is a microprocessor controlled, multifunction metering pump, suitable for applications which require proportional dosing. The eOne MF 0110 operates at 0.26 GPH (1 LPH) at 145 PSI (10 BAR). **Oxidants may require different pump head configuration. Degassing Pump Head is available for this unit. PVDF Pump Head PTFE (Teflon®) Diaphragm TFE/P (Aflas®) Seals Ceramic Ball Valves Flow Rate – 0.26 GPH (1 LPH) at 145 PSI (10 BAR) 180 Strokes per Minute