DIG Polyethylene Distribution Tubing – 1/2 in. - 0.620 in. (ID) x 1000 ft.

DIG’s distribution tubing is designed and engineered to meet every demand of a low volume drip irrigation system DIG premium polyethylene drip tubing is designed to meet all installation requirements for drip irrigation or low-volume irrigation systems for commercial, agriculture, and residential applications. DIG extrudes its polyethylene tubing at their Vista manufacturing facility, producing over 100 million feet each year. A minimum of 2% carbon black is added to ensure maximum UV protection. The distribution tubing can be broken into 2 types; the 1/8 and 1/4 inch tubing and the 1/2, 3/4, and 1-inch tubing. The only differences in these is that the smaller sizes (1/8" & 1/4") use a slightly lower density polyethylene resin and the larger sizes (1/2", 3/4", & 1") can come in either black, brown, or tan color. The smaller sizes are all black. DIG's polyethylene drip tubing is available in a wide range of sizes and coil lengths. Available in 50', 100', 200', 250', 500', 1000' and 3000' coils (15 m, 30 m, 60 m, 75 m, 150 m, 300 m, 900 m) Available Sizes (Inside & Outside Dimensions) 1/8 Inch ID (0.125" ID x .187" OD) 1/4 Inch OD (0.170" ID x .250" OD) 1/2 Inch ID (0.520" ID x .620" OD) wall thickness: .050" (1.3 mm) (0.570" ID x .670" OD) wall thickness: .050" (1.3 mm) (0.600" ID x .700" OD) wall thickness: .050" (1.3 mm) (0.620" ID x .710" OD) wall thickness: .045" (1.1 mm) 3/4 Inch ID (0.820" ID x .940" OD) 1 Inch ID (1.06 ID x 1.20 OD) *The 1/4 Inch is on the Outside Dimensions. All other sizes are based on Inside Dimensions Features & Benefits Operating Pressre for all sizes: up to 60 PSI (4.2 BAR) Can be used with our wide range of compression and barbed fittings Blank polyethylene distribution tubing is available in 50', 100', 500', 1000' and 3000' coils (15 m, 30 m, 150 m, 300 m, 900 m) Polyethylene drip tubing exhibits a combination of outstanding environmental stress-cracking resistance and burst strength Used with drip emitters, micro sprayers or micro sprinklers in above- or below-grade installation The 500', 1000' and 3000' coils (150 m, 300 m, 900 m) are wound on cardboard cores Extruded from the finest quality low density polyethylene resins UV resistant; contains a minimum of 2% concentrated carbon black, an antioxidant that protect the tubing from thermal degradation Supported by quality control standard and processes to ensure consistent coil productions Material: Dow FINGERPRINT premium grade, DFDA-7510 NT linear low-density polyethylene resin with a minimum of 2% carbon black Compact uniform coils for ease of shipping and storage Five-year limited manufacturer warranty