DIG Maverick 12-Outlet Drip Manifold Kits – No Tubing - Pack of 8

DIG Maverick™ 12-Outlet Drip Kits are used to retrofit a 1/2” sprinkler riser into a 12-outlet drip irrigation system without altering the flow of the sprinkler system zone. Maverick™ 12-Outlet Drip Kits allow installation flexibility when incorporated into a new system with a considerable number of 12 -outlet manifolds on each line. The Maverick™ 12-Outlet Drip Kits utilize extremely accurate, 4 GPH, pressure compensating individual and interchangeable drip emitters to ensure equal flow from each outlet over a wide range of operating pressures from 10 to 80 PSI. Each kit contains a 12-outlet manifold with ½” FPT, twelve 4-GPH PC drip emitters, twelve stakes, eight caps, twelve bug plugs and twelve color-coded converter barbs to convert the 1/8” outlet into a 1/4” outlet for use with 1/4” micro tubing. Additionally, the PC14100 contains 100’ of 1/8” micro tubing. What Is In Each Box? PC14100 (x1) Maverick 12-outlet drip manifold with 4 GPH per zone (x8) plugs to close any unused zones (x12) converter barbs for 1/4" micro tubing (x12) bug plugs for 1/8" micro tubing (x12) tubing holder stakes (x1) 100' of 1/8" micro tubing (x1) instruction manual PC1204 (x1) Maverick 12-outlet drip manifold with 4 GPH per zone (x8) plugs to close any unused zones (x12) converter barbs for 1/4" micro tubing (x12) bug plugs for 1/8" micro tubing (x12) tubing holder stakes N/A (x1) instruction manual Features Replacing the sprinkler riser with the 12-outlet manifold can lead to water savings of 50% to 70% Constructed with 12 individual, interchangeable pressure compensating drip emitters The self-flushing drip emitters utilize a floating silicon diaphragm that allows passage of small particles which otherwise could clog the drip emitter water passages Each drip emitter has a built-in filter Unused outlets may be plugged so that a minimum of 4 of the outlets to a maximum of 12 can operate at once Built with backup disc filter™ for easy cleaning Color-coded removable nozzles for easy replacement and for flow rate identification Can be used to water roses, shrubs, groundcover and trees Complete kit; all parts included Applies water directly to the plant root zone area, leading to less surface evaporation from leaves and soil Eliminates wet walls and discoloration and staining of fences and windows Designed for new and existing landscapes, including oddly shaped areas where a sprinkler head cannot provide good coverage No special tools or glue are needed DIG’s drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes) Barbed elbow outlets allow installation flexibility Pressure compensating feature allows for equal flow rates from each outlet Install above grade, or place below grade in a 6″ emitter box Use with 1/8” and any ID 1/4″ micro tubing About PC14100 PC1204 12-Outlet Drip Manifold Kits The Maverick™ 12-Outlet Drip Irrigation Kits can be used on new or existing installations to convert a sprinkler riser into a drip system, applying 50% to 70% less water than a conventional sprinkler system. The Maverick’s™ high flow drip irrigation outlets are used to apply water at the root zone area of the plant only, reducing pest problems, weed growth and water waste from evaporation and run off. The two kits, recommended for watering individual shrubs or roses, contain a manifold with 12, 4-GPH pressure compensating drip emitters for even uniformity from each outlet, 12 stakes to secure the micro tubing to the ground, 8 caps to close unused outlets and 12 bug plugs to close the end of the 1/8” micro tubing. Additionally, each kit has 12 converter barbs to convert each outlet from the use of 1/8” micro tubing to 1/4” micro tubing with the PC14100 also having 100’ of 1/8” micro tubing to complete the layout. The 12-outlet manifold can be used to cover individual plants or closely spaced groups of plants within the layout The 12-outlet drip irrigation kit applies water utilizing the same short range watering cycles as spray heads to meet most watering applications. Using drip irrigation, water first thing in the morning before the temperatures begin to rise. This will allow excess moisture on leaves and top soil to dry before fungal and other diseases can develop. The most common cause of early plant death is over watering. Using drip irrigation can help sustain healthy plants by applying water directly to the plant root zone when and where it is needed. For established plantings, deep, infrequent watering is recommended. In most cases applying deep watering will encourage deeper rooting, which leads to stronger, healthier plants. Installation suggestions The Maverick™ 12-Outlet Drip Irrigation Kits are designed to convert a 1/2″ sprinkler riser into a drip irrigation system. The 12-outlet drip irrigation manifold may be incorporated into a new system, or used to convert an existing sprinkler riser to a multi-outlet drip irrigation system. Retrofitting a conventional sprinkler riser to a water-saving drip irrigation system requires a few simple steps including evaluation of the areas to be watered and selection of the best method to water. The most suitable uses for a multi-outlet drip irrigation manifold include watering shrubs, trees, roses, pots or individual plants that can be irrigated more efficiently using a drip irrigation system. First, we recommend using the 12-outlet drip irrigation manifold in an area where the plants are close to the sprinkler riser you are replacing. We also recommend using short lengths of micro tubing, not exceeding six to eight feet from the riser, to allow for easy maintenance. Make sure that the output of the manifold is sufficient to cover the plants in the area close to the sprinkler riser. Our suggestion is to use a minimum of two outlets per plant. Remove the sprinkler from the riser. Turn the water on to flush the line. Then shut off the water and thread the multi-outlet manifold onto the riser. This option will allow for a flow of 4 GPH from each outlet used. Remove the manifold cover and remove the mini disc filter. The 12 outlets with the 4 GPH nozzles can be seen. Make sure that the entry to the nozzles is kept clean. From the manifold outlets, extend two measured lengths of 1/8” micro tubing to each plant selected to have a drip irrigation outlet. Secure the end of the micro tubing with the stake included in the kit, and to the end of the micro tubing, insert the bug plug to protect the outlet from bugs. The bug plug is also included in the kit. If used with 1/4” micro tubing, insert a 1/4” converter barb into one of the 12 outlet ports by pressing the round part of the barb into a port. To the barb, connect 1/4” micro tubing and lay the micro tubing to the plant area. An additional option is available when 1/4” micro tubing is used: To the end of the micro tubing, insert a 1/4″ barb (model H80 not included in the kit) and connect a maximum length of four to six feet of 1/4″ drip line (model SH50 not included in the kit) or 1/4” soaker hose (model PSH50 not included in the kit) and loop it around the plant. This option will provide a larger wetted area under the plant canopy from one outlet but with less water as the flow is divided between the numbers of outlets used. If any of the outlets are not used, close the top of each unused drip emitter nozzle with the rubber cap included. Insert the mini disc filter and thread the cover back on, making sure that the large “O” ring is in place. Turn the water on and check the system, making sure that all outlets are working and the location of each outlet meets your needs and there is no leak from the 12-outlet manifold. One of the most common installation errors is using too few, and poorly spaced, drip emitters. Often only a single emitter is placed at the base of a newly planted tree or shr