Across International AccuTemp 7.5 CF Vacuum Oven with All SST Tubing - UL/CSA Certified – 220 Volt

SST (stainless steel) tubing refers to internal tubing and compression. external tubing not included. Introducing the new UL/CSA certified 5-shelf AccuTemp 7.5 cu ft vacuum ovens, this certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan. Also come standard is the secondary over-temp protection dial, stainless steel tubing, stainless steel vacuum & vent valve, oil-filled vacuum gauge, and two year warranty. With our new internal shelf heating technology, each shelf in these ovens has its own heater, in-shelf temperature sensor and temperature controller, together with great thermal-conductive aluminum and our new low proportional controller technologies, the result is perfect uniformity, accurate temperature, super-fast heating rates, minimum heat loss/exterior temperature and very low power consumption. Every one of our vacuum ovens goes through a 2-time 24-hour vacuum leak test, and is quality controlled in New Jersey or Nevada before leaving our warehouses. Features All stainless steel internal tubing provides higher ultimate vacuum, holds vacuum 10 times longer, and require minimum maintenance. Oil-filled mechanical vacuum gauge provides more accurate reading, longer gauge life and minimizes shipping damage. All stainless steel vacuum and vent valves gives you cleaner connection, more accurate control and long term durability. Five aluminum heating shelves with individual in-shelf temperature sensor, heater and digital temperature controller. 3rd gen low proportional gain temperature controllers keep your oven temperature within +/- 1°F accuracy, in either °F or °C. Best choice for the curing and converting of oil extracts. With deep vacuum level, they can operate at temperatures which allow the degassing/purging process to occur rapidly, thus increase productivity and allow for the production of superior quality products with minimal processing time. Dual layer observation window with 3/4" tempered safety glass. 3" thermal insulation prevents heat loss and minimizes the enclosure's outer surface temperature. Easy-to-clean stainless steel interior for exceptional durability and ease of maintenance. A vacuum environment lowers the boiling point (great for processing heat sensitive materials) and reduces drying time for materials like paste or powder which cannot otherwise be easily dried. Built-in alarm alerts you when oven has been shut down by safety circuitry due to out of range temperature. Built-in station-able swivel casters with locks for ultra-portability. For improved temperature tracking, run the auto-tune procedure as outlined in the manual. All ovens shipped from our New Jersey or Nevada location for quick delivery, and come with two year warranty and lifetime US-based parts and service support. Guaranteed US based phone and email assistance within 30 minutes from our engineers. Manufactured in accordance with UL 61010-1 CSA C22.2 ISO 9001:2000 ISO 12100-1:2003, ISO 12100-2:2003 EN1050:1996, EN294:1992, EN60204-1:2006 CE IMPORTANT! NEVER LEAVE YOUR OVEN UNATTENDED WHILE OPERATING. Across International is not responsible for any loss of material inside of the oven. Product Specifications: Electric 110V +/-10% 60Hz 1-PH 13.6A, 1,500 watts or 220V +/-10% 50/60Hz 1-PH 6.8A, 1,500 watts Heater 300 watts x 5, built into 5 aluminum shelves, for the fastest, most energy efficient and uniform heating Chamber Size: 22 x 23.5 x 25" Material: Stainless steel Capacity: 7.5 cubic feet Temperature control Controller: 3rd gen low proportional gain, microcomputer PID controlled with LCD display Range: ambient to 480°F Display units: Fahrenheit or Celsius Accuracy: +/- 1°F Uniformity: +/- 5% of setpoint Dwelling timer range: 1 to 9999 minutes Warm-up time to 100°F: 45 minutes Warm-up time to 480°F: 2 hours 15 minutes Vacuum Ultimate vacuum level: better than 500 microns/millitorrs ( may vary based on your altitude, click here to learn more ) Mechanical gauge range: 0 to 30 inch mercury Vacuum port: KF25 flange x 1 Vent port: 3/8" hose barb x 1 Vacuum pump: Sold separately Weight Unit: 410 Lbs, shipping: 630 Lbs Dimensions (WxDxH) Unit: 35 x 31 x 38" Shipping: 38 x 35 x 43" Shelves Heated shelves: 5 non-removalbe aluminum shelves, 22 x 23.25" (WxD) each Optional stackable aluminum shelves: 22 x 23.25 x 2.25" (WxDxH) Total area without stackable shelves: 512 x 5 = 18 sq ft or 2560 inch 2 Total area with 5 stackable shelves: 512 x 10 = 36 sq ft or 5120 inch 2 Distance between shelves (without stackable shelves): 4.5 inches Distance between shelves (with 5 stackable shelves): 2.25 inches Door gasket material Silicone or Viton Observation window 1/2" tempered safety glass Safety Built-in circuit breaker Overheat shutoff protection Secondary over-temp protection dial In-door lights White LED (pre-installed) Warranty 2 years Compliance UL/CSA< (E482564), CE What's Included: Part description Quantity Ai UL/CSA certified AccuTemp 7.5 cu ft vacuum oven 1 pc KF25 quick clamp and centering ring 1 set User's manual 1 pc