Across International -30C 10L Recirculating Laboratory Chiller with 20L/Min Centrifugal Pump, 220V – No Thanks

Ai C30 series recirculating chillers are the true thermostatic control laboratory chiller, these closed laboratory chillers are ideal for applications such as cooling rotary evaporators, analytical instrumentation, laser etching, ICP, vacuum systems, plasma etching and jacketed reactors. This system can also be used as a replacement to tap water cooling in laboratory applications. Ai C30 are compressor-based recirculating chillers that offer outstanding performance and high reliability as well as quiet operation and ease-of-use. Powerful force/suction pump provides constant flow rates, while microprocessor PID controller gives you the ideal solution when you need precise temperature control or cooling below ambient temperature. IMPORTANT! -20°C ULTIMATE TEMPERATURES ARE TESTED UNDER EMPTY LOAD CONDITION (NO ROTARY EVAPORATORS OR JACKETED REACTORS ATTACHED). Features UL 61010-1 and CSA C22.2 certified (optional) No dry ice or liquid nitrogen needed Advanced PID digital temp controller Built-in chilling fluid filter protects the recirculating pump and prevent blockage All steel construction for durability Cost saving as the water consumption is completely eliminated Built-in casters for mobility Eco-friendly R410A refrigerant Insulated tubing included Recommended for 5L rotary evaporators What's Included Ai -30°C/-22°F recirculating chiller 3/8" insulated chilling fluid tubing, 11 ft 3/8" stainless steel chilling fluid connector with on/off valve PTFE sealing tape User's manual Specs Model C30-10-5L Temperature range Ambient to -30°C (No load) Electrical requirements 220V 60Hz 1-PH, 1,100 watts (Not compatible with 50Hz power) Cooling capacity (Assuming working environment 25°C/77°F) @ 32°F/0°C: 1,250W @ 14°F/-10°C: 800W @-4°F/-20°C: 300W @-22°F/-30°C: 150W Compressor Make: Panasonic Power: 208-230V 60Hz 1-PH Number of compressor: one Refrigerant: R410A Recirculating pump Type: Centrifugal Output: 100 watts Pumping speed: 20 L/min or 5.3 gallon/min Maximum head: 20 feet or 6 meter Maximum pressure: 5.8 psi Coolant outlet pressure Displayed on the built-in mechanical pressure gauge Reservoir Material: Type 304 stainless steel, polished Chilling fluid connection: 3/8" hose barb x 2 Capacity: 10 liters or 2.6 gallons Temperature controller Type: Digital microprocessor PID controlled Display unit: Celsius °C Temperature accuracy: +/- 2°C Temperature range: Ambient to -30°C Temperature sensor type Pt100 Housing Powder coated type 42 stainless steel Recommended coolant For 50°F/10°C or higher: distilled water Between 50°F/10°C and -22°F/-30°C: 50% ethylene glycol + 50% distilled water Working environment -15°C/5°F to 25°C/77°F, at <66% humidity Built-in swivel casters Four Unit/shipping dimensions 26.5 x 17 x 27" / 32 x 22 x 36" (WxDxH) Unit/shipping weight 155 Lbs / 210 Lbs Safety Compressor over-temp protection Compressor delay start protection Short circuit and ground protection Over-current protection Recommended for rotary evaporators Ai 5L SolventVap rotary evaporators Warranty One year Compliance UL 61010-1 :2012 Ed.3+R:29Apr2016 CSA C22.2#61010-1 :2012 Ed.3