
In Stock
Weather Station by Growlink
☆☆☆☆☆
Department: Garden & Grow
$2,250.00
All-in-One SDI-12 Weather Sensor with No Moving Parts
The Growlink Wireless Weather Station centers on Campbell Scientific's ClimaVUE50 — a compact digital head with no cups, no vanes, or tipping buckets.
Purchase directly from Growers HouseAll-in-One SDI-12 Weather Sensor with No Moving Parts
The Growlink Wireless Weather Station centers on Campbell Scientific's ClimaVUE50 — a compact digital head with no cups, no vanes, or tipping buckets. One SDI-12 line carries air temperature, RH, vapor pressure, barometric, wind, solar radiation, precipitation, and lightning back to the controller. Wind reads 0–30 m/s at ±0.3 m/s or 3%, precipitation lands at 0.017 mm resolution, and solar covers 0–1,750 W/m².
Compact Outdoor SDI-12 Weather Sensor Built for Long-Term Sites
Average current sits under 1 mA at 12 Vdc. The head pairs cleanly with a small solar panel and a 12 V battery for off-grid sites. A built-in tilt sensor flags mast lean that would skew wind direction or rainfall totals. Mount the head on a 1.25–2.0 in OD pole using the included V-bolt. The Growlink wireless module pushes readings to the dashboard alongside your terraLINK substrate and ESM climate channels.
Key Features
ClimaVUE50 SDI-12 head: Air temp, RH, vapor pressure, barometric, wind, solar, precipitation, and lightning log over one SDI-12 line.
No moving parts: Sonic wind, acoustic rain, and AM-band lightning detection — nothing wears out the way cups and tipping buckets do.
Wind 0–30 m/s at ±0.3 m/s or 3%: Direction reads 0–359° at ±5°, accurate enough for VPD and ET math on greenhouse vents.
Precipitation at 0.017 mm resolution: Acoustic detection captures micro-events and stays accurate through driving rain to 400 mm/h.
Solar 0–1,750 W/m² and barometric 500–1,100 hPa: Full-spectrum site logging for dew point, ET, and front tracking.
Built-in tilt sensor: Flags mast lean that would skew wind direction or rainfall totals after a freeze cycle.
<1 mA at 12 Vdc: Pairs cleanly with a small solar panel and a 12 V sealed battery for off-grid sites.
Technical Specifications
Specification
Value
Sensor head
Campbell Scientific ClimaVUE50
Communication
SDI-12 to Growlink wireless module
Measured parameters
Air temp, RH, vapor pressure, barometric pressure, wind (speed/gust/direction), solar radiation, precipitation, lightning (count + distance)
Wind speed
0–30 m/s; ±0.3 m/s or 3%
Wind direction
0–359°; ±5°
Precipitation
0–400 mm/h; 0.017 mm resolution; ±5%
Solar radiation
0–1,750 W/m²; resolution 1 W/m²; ±5%
Barometric pressure
500–1,100 hPa; ±1 mb
Operating temperature
-50°C to +60°C
Average current
<1 mA at 12 Vdc
Mounting
V-bolt for 1.25–2.0 in (31.8–50.8 mm) OD pipe
Tilt sensor
Built-in
Moving parts
None
Optional add-on
Apogee SQ-521 SDI-12 quantum PAR sensor
Sensor Specifications
Parameter
Principle
Range
Resolution
Accuracy
Wind Speed
Ultrasonic
0–40 m/s
0.01 m/s
±0.5 + 2% FS
Wind Direction
Ultrasonic
0–359°
1°
±3°
Temperature
MEMS
–40 to +100°C
0.1°C
±0.5°C
Humidity
MEMS
0–100% RH
0.1% RH
±3%
Atmospheric Pressure
MEMS
10–1100 hPa
0.1 hPa
±1.5 hPa






