Twister Trimmer Feed Conveyor (inbound)

Where the Twister Feed Conveyor Sits on the Line Ahead of the trimmer, not behind it. A machine fed by hand runs in surges, and a surge is what produces an uneven cut. This belt meters flower in at a rate you set, from 0 to 35 ft/min. That is more than twice the speed the outfeed belt runs at. Feeding wants pace, not inspection time. Setting Up the Inbound Conveyor Beside a Trimmer Height is what makes or breaks the install. The legs adjust from 23 to 33 in, a wider range than the outfeed belt gets. It has to reach the top of a T2 or T4 rather than the discharge. The belt is 3.75 in wide inside 3.5 in walls, on a 60 in run. That keeps flower in a single lane instead of spreading. The contact surface is FDA approved urethane. Power is 115V at 1.3A from a 1/30 HP, 25W motor on a 15A circuit. It carries UL, CSA, CE and ROHS marks, which matters more on an inbound belt than people expect at inspection time. Ship weight is about 44 lbs in a 60 x 40 x 12 in crate, with a year on parts. Key Features 0 to 35 ft/min: More than twice the outfeed belt. Feeding wants pace, not dwell time. Legs adjust 23 to 33 in: Wide enough to meet the top of a T2 or T4 rather than the discharge. 3.75 in belt, 3.5 in walls: A single lane on a 60 in run, so flower does not spread across the belt. FDA approved urethane belt: The only surface the flower touches on the way into the machine. 115V, 1.3A, 1/30 HP: A 15A circuit and a standard single phase supply. No electrician needed. UL, CSA, CE and ROHS: About 44 lbs shipped, crated at 60 x 40 x 12 in, with a year on parts. Technical Specifications Specification Value Model Feed Conveyor, inbound Part Number 26-0001-02 Belt Length 60 in, 152 cm Belt Width 3.75 in, 9.5 cm Wall Height 3.5 in, 8.9 cm Total Width 13 in Belt Material Urethane, FDA approved Speed 0 to 35 ft/min, 0 to 12 m/min Leg Height 23 to 33 in, 58 to 84 cm Input Voltage 115V, 50/60 Hz Current 1.3A Motor 1/30 HP, 25W Circuit 15A at 120V Certifications UL, CSA, CE, ROHS Compatibility Twister T2 and T4 Ship Weight About 44 lbs, 20 kg Ship Dimensions 60 x 40 x 12 in Warranty 1 year, parts