TurboKlone T24 Manifold

TurboKlone T24 Manifold for Even Cloner Misting A cloner only roots cuttings as evenly as its manifold sprays, and a cracked or clogged one leaves whole sites dry. This manifold is the replacement spray hub for the 24-site TurboKlone cloner, feeding all 24 jets from one distribution ring. Pump water enters the manifold and splits to each spray site, misting the cutting stems in high-oxygen water. Swapping in a fresh manifold restores even coverage across every collar without rebuilding the machine. A grower then brings a tired cloner back to full, even misting in minutes. 24-Site Replacement That Matches the Machine It drops into the 24-site TurboKlone body, matched to that machine so the jet spacing lines up. At 5 by 4 by 3 inches, it sits in the reservoir. It connects to the pump on one side and the spray jets on the other. Pump and reservoir are sold separately, since this is the manifold on its own. Keeping a spare on the shelf means a mid-run failure does not stall a propagation cycle. For anyone running a T24, it is the part that keeps every clone site misting evenly. Key Features Feeds 24 jets: Splits pump water to every spray site at once Direct replacement: Matches the 24-site TurboKlone cloner body Even misting: Restores full coverage across every collar Compact: 5 by 4 by 3 inches, sits in the reservoir Manifold only: Pump and reservoir sold separately Technical Specifications Specification Detail SKU T24-04 Type Replacement spray manifold Fits 24-site TurboKlone cloner (T24) Spray Sites Feeds 24 jets Dimensions 5 x 4 x 3 in Included Manifold only (pump and reservoir separate) Use Distributes pump water to the spray jets