ThinkGrow 10' 30A AWG#10 Extension Power Cords

ThinkGrow DEA-10L 10 ft 30A AWG#10 Extension Power Cord The longer sibling to the 3 ft DEA-10. The DEA-10L is the same 30A, 10 AWG (5.26 mm2) daisy-chain cord. Stretched to 10 ft (3 m) for fixture-to-fixture spans that do not fit a 3 ft jumper. 100-277V auto-sensing, ETL-listed, and IP67-rated at the connectors. A foliar spray pass or evaporative cooler condensation will not take the chain offline. When the 10 ft Length Beats the 3 ft Jumper Tight fixture spacing — under 36 inches center-to-center — gets the 3 ft DEA-10. Wider hung rows, T-shape ceilings, or runs around obstacles get the 10 ft DEA-10L. Same 30A ceiling. A single 30A 277V circuit holds up to 18 fixtures on the chain regardless of which jumper length is used. Growers typically tie-wrap the longer cord to the ceiling truss so it does not drape into a fixture's heatsink. Key Features Length: 10 ft (3 m), the long jumper for fixtures spaced wider than 36 inches center-to-center Wire gauge: 10 AWG copper, 5.26 mm2 — same conductor as the 3 ft DEA-10 Amperage: 30A continuous, the ceiling for ThinkGrow daisy chains Voltage range: 100-277V auto-sensing, every current ThinkGrow LED fits Chain capacity: Up to 18 fixtures per 30A circuit Certification: ETL-listed, IP67 waterproof connectors Technical Specifications Specification Value Model DEA-10L Length 10 ft (3 m) Wire Gauge 10 AWG (5.26 mm2) Amperage 30A Voltage Range 100-277V auto-sensing Certification ETL-listed, IP67 waterproof connectors Chain Capacity Up to 18 fixtures per 30A circuit