The Original Resinator XL Classic Bundle | Pre-Owned XLR Unit

What the Original Resinator XL Classic Bundle Includes This is the XLR, and the Classic Bundle is the kit that arrives ready for all three of its functions. The machine trims without blades, sifts kief, and washes ice water hash, all inside the same drum. Capacity splits by job, at 7 lb of dry material per run for trimming or washing. Sifting takes more, with over 14 lb of trim going through per run. Across a full day Cryo-Trim and Cryo-Sieve are rated at 672 lb dry or 2,016 lb wet. Ice water washing is rated lower, at 224 lb dry or 672 lb wet per day. The bundle carries a three-piece drum screen set in 200, 100 and 75 micron, with four resin collection bags to match. A quarter-inch mesh screen handles the trimming job. Six anti-bacterial resin collection tools come with it, along with the hoses and fittings for water and liquid CO2 operation. A digital scale, a digital thermometer and a digital timer round out the kit. A USB stick carries itemised standard operating procedures for each function. Power is a standard 110 to 120 V outlet drawing under 1.5 A, so the machine plugs into a wall. The cabinet measures 41 by 23 by 27 in. Running an Ice Water Hash Machine and a Kief Sieve in One Drum An ice water hash machine earns its place in a room by how quickly it turns material around. Here the drum changes jobs when the screen inside it changes. A mesh trim screen for trimming, a micron screen for sifting or washing, and the same motor underneath either one. Liquid CO2 is the part that changes what the drum can do. Fed into the chamber, it flash-freezes leaf so trichomes snap off cleanly instead of smearing. The trimming window runs between ten and thirty degrees Fahrenheit. For extraction the chamber goes below minus sixty-five. The gas comes from a tank and an infusion kit, specified alongside the machine. Bringing the chamber down takes about an hour, and twenty to twenty-five pounds of gas to displace the oxygen in it. Expect roughly two XL runs from a fifty pound tank. Cleaning is where a multi-function drum either stays honest or stops earning its keep. Screens lift out, and both ninety-nine and seventy percent alcohol are safe on them. Rinse with water afterwards and let them dry fully before the next strain goes in. The motor carries a safety cut-out, and resetting it means unplugging the machine and letting the drum come to a full stop before it reverses. Key Features Three jobs, one drum: Bladeless trimming, kief sifting and ice water hash washing. 7 lb per trim run: Over 14 lb of trim per run when the job is sifting. 200, 100 and 75 micron: A three-piece drum screen set with matching collection bags. Liquid CO2 cryo: Flash-freezes the chamber so trichomes snap free of the leaf. Standard wall outlet: 110 to 120 V at under 1.5 A, with no panel work. Kit arrives complete: Scale, thermometer, timer, resin tools, hoses and fittings. SOPs on a USB stick: Itemised operating procedures for each of the three functions. Pre-owned, graded like new: A single unit, boxed with its wiring. Technical Specifications Specification Value Model XLR Functions Bladeless trim, kief sift, ice water hash wash Trim or wash capacity 7 lb dry material per run Sift capacity Over 14 lb of trim per run Cryo-Trim / Cryo-Sieve throughput 672 lb per day dry, 2,016 lb per day wet Ice water wash throughput 224 lb per day dry, 672 lb per day wet Drum screens included 200, 100 and 75 micron Trim screen Quarter-inch mesh Resin collection bags 4 Resin collection tools 6-piece anti-bacterial set Instruments included Digital scale, digital thermometer, digital timer Documentation USB stick with SOPs for each function Voltage 110 - 120 V Current draw Under 1.5 A Cryogen Liquid CO2; tank and infusion kit specified separately Trimming temperature range 10 - 30 °F Extraction chamber temperature Below -65 °F Dimensions 41 x 23 x 27 in Condition Pre-owned, graded like new; boxed with wiring Location: Kansas City, MO