Smart Volt Power Cord 15 ft | 120V 16-Gauge | Ballast Compatible

120V 15ft ballast cord for far-set ballasts and rack tops The Smart Volt 15ft cord delivers 120V to digital and magnetic ballasts through a 16-gauge copper conductor. The longer 15-foot reach handles rack-top ballasts where the outlet sits more than two strides from the unit. It pairs with Sun System, Galaxy, Lumatek, Phantom, NextGen, Hydrofarm, Solis Tek, and Xtrasun fixtures. Wall-end and ballast-end terminations match the outlet pattern most grow rooms already have on the wall. 16-gauge copper holds the steady ballast draw over an entire lights-on cycle without warming the jacket. 120V ballast power cord that lands at off-aisle ballasts Growers typically run a longer cord when the ballast lives on a shelf or rack top instead of beside the wall. Place the cord with the ballast plug seated first, then dress the slack along the rack rail to the outlet. On a 120V circuit the cord supports legacy magnetic ballasts and modern digital ballasts on the same outlet. Compatibility runs across Sun System 1, Sun System 6, Crop Master, Harvest Pro, Phantom, and Solis Tek lines. The 16-gauge conductor matches the gauge most ballast manufacturers spec for medium-distance feeders. And the 15-foot length avoids the splice or extension cord that growers reach for when 6 feet falls short. Pair the cord with a timer or controller upstream so cycling happens at the controller, not the ballast switch. That keeps the ballast-end termination from cycling mechanically every flip and extends the connector life. Key Features 16-gauge copper conductor: Standard ballast-feeder gauge that handles continuous HID ballast draw on a 120V circuit. 15-foot cord length: Reaches rack-top ballasts that sit more than two strides from the wall outlet. Wide ballast compatibility: Fits Sun System, Galaxy, Lumatek, Phantom, NextGen, Hydrofarm, Solis Tek, Xtrasun, and more. 120V North American input: Drops in to standard household and grow-room outlets without adapters. Digital and magnetic ballast support: Single cord covers both legacy magnetic and modern digital ballast designs. Technical Specifications Specification Value Voltage 120V Gauge 16-gauge copper Length 15 ft Ballast Compatibility Sun System, Galaxy, Lumatek, Phantom, NextGen, Hydrofarm, Solis Tek, Xtrasun, and more Ballast Type Digital and magnetic