Ruck 24 inch Prime Mixed Flow Inline Duct Fan. 16,250 m3/h, 400V

Ruck 24 Inch Prime Mixed Flow Runs on 400V This is the largest fan Ruck makes in the Prime line, and it is industrial plant rather than grow-room kit. It needs a 400V three-phase supply. It draws a rated 2,745W and a maximum 6.1A, moving 16,250 m³/h against up to 990 Pa. Aluminium housing, 3D impeller, mounting bracket included. When a Three Phase Inline Fan of This Size Makes Sense Almost no one needs this, and that is worth saying plainly. It suits a large commercial facility, a multi-room build, or an industrial process where the duct network is long and heavily loaded. Below that scale a 20 inch on single-phase 240V will do the job for far less capital and wiring. Where it does fit, that pressure figure is the reason, because it holds airflow through resistance that stops everything smaller. It is rated to 60°C ambient, and an electrician should be involved well before it is specified. Key Features 16,250 m³/h: The largest airflow figure in the Ruck Prime range. 990 Pa Maximum Pressure: Holds output through long, heavily loaded duct networks. 400V Three-Phase: Industrial supply required, so plan the electrical work first. 2,745W Rated Power: Rating for sizing supply, protection and cabling. 6.1A Maximum Current: Low current for the power, because of the 400V supply. Aluminium Housing: Corrosion-resistant and lighter than steel at this diameter. Rated to 60 °C: Handles warm extract air in industrial and horticultural plant. Technical Specifications Specification Value Duct Size 24 in Airflow 16,250 m³/h Maximum Pressure 990 Pa Supply 400V, three-phase Rated Power 2,745 W Maximum Current 6.1 A Motor Three-phase AC Impeller 3D shaped, mixed flow Housing Aluminium Maximum Medium Temperature 60 °C Mounting Bracket included