Netafim UV White / Black Polyethylene Tubing 16mm (.52 in ID x .62 in OD) - 500 ft

Netafim 16mm White/Black PE Tubing for Drip Laterals Every row in a drip system hangs off a lateral, and if that line heats up or clouds with algae, the whole run suffers. The Netafim 16mm white/black PE tubing is the co-extruded lateral built to keep both problems out. A white outer skin reflects heat and UV while a black core blocks light, so algae cannot bloom inside the line. It measures .52 in ID x .62 in OD with a .050 in wall that holds punch-in emitters without splitting. This 500 ft roll runs a full set of rows off the mainline. Punching 16mm Lateral Line for Drippers and Takeoffs Growers roll the line down a bench or row, punch it, and seat on-line drippers or 17mm TechLock takeoffs wherever a plant needs feeding. The white skin keeps water cooler and the tubing from cracking in the sun, so the lateral survives seasons in the open. The black core keeps the inside clear, sparing a grower the algae flush that clogs emitters mid-season. It is the lateral that pairs with a 1 in white/black mainline for a matched, clean-running system. A 500 ft roll covers a full block of rows with no mid-job splice. Key Features Co-extruded white-over-black: UV-reflective skin over an algae-blocking core. .52 in ID x .62 in OD (16mm): Standard drip lateral size for on-line drippers. .050 in wall: Flexes down rows and holds punch-in emitters. White skin, black core: Cooler water and no algae in the line. 500 ft roll: Laterals for a full set of greenhouse rows. Technical Specifications Specification Value Model PE052062-05 Inner Diameter .52 in Outer Diameter .62 in Nominal Size 16mm Wall .050 in Material Low-density polyethylene (white/black co-extruded) Roll Length 500 ft