Netafim Flex Black PE Tubing 5/3mm 1000ft coil

Netafim Flex Black PE Tubing for Custom Drip Leads Every pot on a drip bench needs a lead from the supply line, and the right length depends on the layout. A bulk coil lets the grower cut each lead to fit the bench instead of working around fixed lengths. This Netafim coil, item 40001-001980 and model 15FPE53-1000, holds 1,000 ft of Flex Black polyethylene micro tube. Its size is 5/3 mm, meaning a 5 mm outside diameter and a 3 mm bore. Netafim specifies this tubing for its PC spray stake assemblies, from the dripper to the stake elbow. The same 3 x 5 size fits the barbed outlets on Netafim's flat multi-outlet manifolds. Netafim's 3 x 5 micro-tube adapter connects a dripper with a nipple outlet to this tube as well. The tube stays flexible, so leads bend easily into each pot. The black polyethylene is UV and acid resistant. That matters on benches exposed to sun and to acid injection in the irrigation water. Cutting and Routing 5/3 mm Micro Tubing Measure the run from the lateral to the farthest pot before cutting the first lead. Cut with a sharp blade so each end is square and seals fully on its barb. Push the tube onto the dripper or manifold barb until it covers the barb completely. Fit the stake or emitter on the other end the same way. Keep all the leads on a zone close to the same length so friction losses stay alike. Route each lead along the pot rim rather than across walkways where carts can snag it. A coil this size covers many stations, so offcuts stay useful for repairs. Keep the coil bagged between jobs so dirt stays out of the open ends. Flush the supply line before connecting the leads so debris does not lodge in the small bore. Check each joint for drips on the first run and reseat any lead that weeps. Key Features • 5/3 mm micro tube: 5 mm outside diameter, 3 mm inside diameter. • 1,000 ft coil: Cut leads to the exact length each pot needs. • Netafim system fit: Used in Netafim PC spray stake assemblies and on 3 x 5 manifold outlets. • UV and acid resistant: Black polyethylene for exposed benches and acid-injected water. • Flexible PE: Bends into containers and along bench edges. Technical Specifications Specification Value Item Number 40001-001980 Model 15FPE53-1000 Type Flex Black polyethylene micro tubing Size 5/3 mm (5 mm OD x 3 mm ID) Coil Length 1,000 ft Color Black Material Polyethylene (PE), UV and acid resistant Compatible With Netafim PC spray stake assemblies, 3 x 5 flat manifolds and micro-tube adapters