Netafim .636in Twist-Lock Line End - 50 Pack

Netafim .636in Twist-Lock Line End for Dripline Runs The far end of every dripline has to close tight, or the whole lateral bleeds pressure and the last emitters starve. This line end caps 16mm thinwall dripperline with a simple twist of the nut. There is no glue, no fold-and-clamp, and no separate tie, since the twist-lock grabs the line and holds it shut under pressure. An integrated loop lets a grower stake the end down so the line stays put along the row. The last plant on the run then draws the same flow as the first. 16mm Dripline End Plug That Opens to Flush When a line needs flushing, the twist design opens the end to purge grit and debris, then locks closed again. That keeps thinwall driplines clear season after season without cutting and re-capping. It fits any 16mm dripperline with a wall from 4 mil up to 32 mil, matching most Netafim lines. A 50-pack closes and stakes a full block of laterals in one pass. For a clean, serviceable end, it beats a folded-over crimp every time. Key Features Twist-lock close: Caps 16mm dripline with no glue, fold, or clamp Opens to flush: Twist open to purge debris, then lock closed Staking loop: Integrated loop anchors the line end in place Wide wall range: Fits thinwall dripperline from 4 to 32 mil Pack size: 50 line ends per pack Technical Specifications Specification Detail Model T63036600170-B Type Twist-lock line end (end plug) Dripline Size 0.636 in (16mm) thinwall Wall Range 4 mil to 32 mil (0.1 to 0.8mm) Feature Integrated end-loop for staking Function Closes line; opens to flush and re-locks Pack Size 50 line ends