Home›Cannabis Grow›Grow Equipment›iLuminar Under Canopy 6 ft Power Cord Extension 0-10V | 120V/240V/277V Daisy Chain

In Stock
iLuminar Under Canopy 6 ft Power Cord Extension 0-10V. 120V/240V/277V Daisy Chain
☆☆☆☆☆
$25.00
iLuminar Under Canopy Power Cord Extension with 0-10V Daisy Chain Port
The Under Canopy cord runs 6 ft between iLuminar Under Canopy 160W fixtures. It adds a built-in 0-10V dimming port for daisy-chained control across the chain.
Purchase directly from Growers HouseiLuminar Under Canopy Power Cord Extension with 0-10V Daisy Chain Port
The Under Canopy cord runs 6 ft between iLuminar Under Canopy 160W fixtures. It adds a built-in 0-10V dimming port for daisy-chained control across the chain. Voltage support spans 120V, 240V, and 277V, with daisy-chain capacity of 12 fixtures on 120V, 24 on 240V, and 28 on 277V. The 0-10V control line travels alongside the AC power on a single cord. That keeps under-canopy wiring tight against rack uprights and out of plant contact. Primary compatibility is the 160W Under Canopy fixtures in R-Spectrum and Full Spectrum versions. Cross-brand pairings work where the connector and pinout match.
iLuminar Under Canopy Cord with Voltage Scaling for 120V, 240V, and 277V
Growers typically place under-canopy bars about 6 to 12 inches above the rack tier they light. The 6 ft cord gives enough slack to reach across a 4-foot bench without coiling on the canopy. Daisy-chain capacity scales with circuit voltage. A 277V commercial circuit drives 28 fixtures off a single feed. That is why most multi-tier vertical builds run on 277V where the panel allows it. The 0-10V port supports compatible drivers without an adapter. Cross-brand pairings work where the connector matches. Pair it with proper 277V whips at the panel side of the chain.
Key Features
0-10V Daisy Chain Port: Sends a single dim signal across the entire chain on compatible drivers.
Voltage Scaling: Same cord supports 120V (12 fixtures), 240V (24 fixtures), 277V (28 fixtures).
6 ft Length: Reaches across 4-foot benches without slack coiling on top of the canopy.
Under Canopy 160W Compatibility: Direct-fit for iLuminar Under Canopy R-Spectrum and Full Spectrum fixtures.
Commercial 277V Friendly: Drives 28 fixtures off a single 277V feed for multi-tier vertical builds.
Technical Specifications
Specification
Value
Type
Main-line power cord with 0-10V port
Length
6 ft
Voltage Support
120V / 240V / 277V
Cord Carries
AC power + 0-10V dim signal
Max Daisy Chain @ 120V
12 fixtures
Max Daisy Chain @ 240V
24 fixtures
Max Daisy Chain @ 277V
28 fixtures
Dim Protocol
0-10V
Primary Compatibility
iLuminar Under Canopy 160W (R-Spectrum and Full Spectrum)
Also Available
3 ft version






