Iluminar 240V Power Cord Set. iLW iL23 iL47 iL63. 6 ft IP67

iLW iL23 iL47 iL63 cord for 240V plug-and-play LED installs The Iluminar 240V power cord delivers 240V to iLW, iL23, iL47, and iL63 fixtures through a 6-foot sealed run. An IP67 connector keeps the joint dust- and water-tight against the moisture swings of an active flower room. 1.8-meter length covers the typical reach from a 240V receptacle to a single iL Series bar fixture. Plug-and-play termination skips the loose-connection failure path that hardwired joints invite over time. The cord ships matched to Iluminar's iLW and iLBar power-input geometry, so no adapters needed. iLW iL23 iL47 iL63 cord that seals at the fixture joint Growers typically run the 240V cord per fixture in commercial rooms wired to 208-240V branch circuits. Place the cable with the locking strain relief facing away from the canopy mist line and any drip path. At the rated IP67 sealing, the connector resists wash-down splash during runoff cleanup mid-cycle. The 6-foot reach lands cleanly from a sub-panel feeder to a single iLBar without slack loops behind the canopy. On a 240V branch the cable trims feeder amperage compared with the 120V variant, freeing breaker headroom. And the sealed connector reads as cleaner on inspection than open terminal blocks in damp flower rooms. Pair the cable with the Iluminar daisy chain to extend the chain past the first fixture on the same branch. That keeps the head end anchored to the breaker while the chain absorbs the rest of the row. Key Features IP67 sealed connector: Keeps the joint dust- and water-tight through canopy mist and runoff cleanup. 240V input, 1.8 m / 6 ft length: Reaches a single iLBar fixture from a 208-240V receptacle without slack. Plug-and-play termination: Skips the loose-connection failure path of hardwired joints over time. Built for iLW, iL23, iL47, iL63: Drop-in fit on the iL Series and iLBar fixture power inputs. Lower feeder amperage at 240V: Cuts amperage roughly in half versus 120V on the same fixture wattage. Technical Specifications Specification Value Voltage 240V Length 6 ft / 1.8 m Sealing IP67 Compatible Fixtures iLW, iL23, iL47, iL63