Iluminar 120V Power Cord Set. iLW iL23 iL47 iL63. 6 ft IP67

iLW iL23 iL47 iL63 cord for 120V plug-and-play LED installs The Iluminar 120V power cord delivers 120V to iLW, iL23, iL47, and iL63 fixtures through a 6-foot sealed run. An IP67 connector keeps the joint dust- and water-tight against humidity swings in an active grow room. 1.8-meter length covers the typical reach from a 120V wall receptacle to a single iL Series bar fixture. Plug-and-play termination keeps the connection clean on tents and small commercial rooms without a 240V branch yet. The cable ships matched to Iluminar's iLW and iLBar power-input geometry, so no adapters required. iLW iL23 iL47 iL63 cord that seals at the fixture joint Growers typically run the 120V cable in tents and small commercial rooms wired to standard 120V outlets. Place the cable with the locking strain relief facing away from the canopy mist line and any drip path. At the rated IP67 sealing, the connector resists wash-down splash and runoff overspray mid-cycle. The 6-foot reach lands cleanly from a wall outlet to a single iLBar without slack loops behind the canopy. On a 120V branch the cable pulls roughly twice the amperage of the 240V variant for the same fixture wattage. Plan the breaker math accordingly — chain depth on 120V is shallower than the 240V variant by design. Pair the cable with a timer or controller upstream so cycling happens at the controller, not the connector. That keeps the joint sealed and the contact temperature steady through repeated lights-on cycles. Key Features IP67 sealed connector: Keeps the joint dust- and water-tight through canopy mist and runoff cleanup. 120V input, 1.8 m / 6 ft length: Reaches a single iLBar fixture from a standard 120V outlet without slack. Plug-and-play termination: Skips the loose-connection failure path of hardwired joints over time. Built for iLW, iL23, iL47, iL63: Drop-in fit on the iL Series and iLBar fixture power inputs. Tent and small-commercial ready: Works on existing 120V branches before a 240V upgrade is in place. Technical Specifications Specification Value Voltage 120V Length 6 ft / 1.8 m Sealing IP67 Compatible Fixtures iLW, iL23, iL47, iL63