Hydro Flow / Netafim Solenoid Globe 2-Way Electric Control Valve - 3/4in (61ET.75GH2)

Netafim Series 80 Solenoid Valve for 3/4 in Zone Control The Netafim Series 80 solenoid valve opens and closes a 3/4 in irrigation zone on a 24VAC signal. A controller or timer runs your watering cycles hands-free. The glass-reinforced nylon body handles 7-150 psi and passes 0.1-26 GPM. That range covers a few drip stakes up to a full bench of emitters. A built-in flow-control stem lets you throttle or shut the zone by hand. Wiring a 24VAC Irrigation Control Valve into Your System Wired one valve per zone, this 24VAC irrigation control valve ties straight into Netafim, Galcon, or most standard timers on the 24-volt terminal. The 3/4 in FPT inlet and outlet thread onto standard mainline fittings, so it drops into an existing manifold without adapters. As a normally closed valve, the zone stays off until the controller energizes the solenoid. Growers usually mount it upright in a valve box or on a bench manifold, with the flow arrow pointing downstream. Key Features 24VAC solenoid: Pairs with standard irrigation controllers and timers for hands-free zone control. 0.1-26 GPM flow range: Handles low-flow drip lines up to higher-volume sprinkler zones. 7-150 psi operating range: Wide pressure window for well, pump, or municipal supply. Glass-reinforced nylon body: Corrosion-free and holds up to fertigation solutions over long runs. Flow-control stem: Throttle or manually shut the zone without cutting power to the solenoid. Technical Specifications Specification Value Model 61ET.75GH2 Valve Type 2-Way Globe Control, Normally Closed Series Series 80 Size 3/4 in FPT Voltage 24VAC (±10%) Flow Range 0.1-26 GPM Operating Pressure 7-150 psi Body Material Glass-reinforced nylon Flow Control Yes (manual stem)