Hanna HI73311 EC Probe | Graphite Spare for DiST 5 and DiST 6

Why the Hanna EC Probe Is Graphite Graphite does not plate up with salts the way a metal pin does, so the reading holds as the electrode ages in a nutrient tank. This is the amperometric graphite sensor, part HI73311. It unscrews from the meter body using the removal tool that shipped with the tester, and the new one screws straight on. It fits the DiST 5 and the DiST 6, sold as HI98311 and HI98312. Knowing When a DiST 5 Probe Is Actually Finished The tell is calibration. When the meter will not hold a one point calibration against a fresh standard, the sensor is finished rather than the tester. The same goes for a reading that drifts while the probe sits still in one sample. Rinse it in clean water after each reading. Nutrient salts that dry on the graphite are what shorten its working life more than anything else. The cost is the thing to weigh. A spare sensor is a real share of what a whole tester costs. If the meter is old and the display is tired as well, a new pen may be the better call. Key Features Amperometric graphite: Does not plate up with salts the way a metal sensor does in feed water. Screws on and off: Uses the removal tool that came with the tester. No soldering and no service visit. Fits DiST 5 and DiST 6: One part covers both the HI98311 and the HI98312. Saves the meter: A worn sensor is a part, not a reason to replace the whole instrument. Rinse after each reading: Dried nutrient salts on the graphite shorten its life faster than use does. Calibration is the tell: If it will not hold a one point calibration on fresh standard, the sensor is done. Weigh it against a new pen: A spare is a real share of the tester price on an older meter. Technical Specifications Specification Value Brand Hanna Instruments Part Number HI73311; SKU 716826 Type Spare conductivity and TDS electrode Sensor Amperometric graphite Fits DiST 5 (HI98311) and DiST 6 (HI98312) Fitting Screws on, using the probe removal tool supplied with the tester Host Meter EC Range DiST 5, 0 to 3999 µS/cm Host Meter TDS Range DiST 5, 0 to 2000 mg/L Replaces The worn sensor only, not the meter body or display Care Rinse in clean water after each reading Replace When The meter will not hold a one point calibration on fresh standard Does Not Measure pH