Hanna DiST 5 EC, TDS and Temperature Tester | HI98311, 0-3999 uS/cm

What the Hanna DiST 5 Measures, and to What Resolution Conductivity reads 0 to 3999 µS/cm in single-microsiemen steps at ±2% of full scale. TDS covers 0 to 2000 ppm and temperature 0.0 to 60.0 °C. The probe is a HI73311 graphite electrode. Graphite is what keeps salts from building into the sensor the way they do on a plated tip. It unscrews when it wears out. The casing is sealed and it floats. Living With a Waterproof Tester in a Wet Room Calibration is one point, automatic, and the meter expects the standard at 1413 µS/cm or 1382 mg/L. Set the conversion factor anywhere from 0.45 to 1.00 so the ppm figure matches the scale your feed chart is written on. The beta coefficient is adjustable too, up to 2.4% per °C, and compensation runs automatically once it is set. Four cells last around 100 hours, with shutdown after eight idle minutes. One thing it does not do. There is no pH on this pen, so a room running both needs a second instrument or a combo meter instead. Key Features 0 to 3999 uS/cm: Single microsiemen resolution, which covers working feed solutions comfortably. TDS and temperature as well: Three readings off one probe, with compensation applied automatically. Replaceable graphite probe: The HI73311 unscrews, so a tired sensor is a part rather than a new meter. Adjustable conversion factor: 0.45 to 1.00, so the ppm figure matches whichever scale your chart uses. Adjustable beta coefficient: Up to 2.4% per degree, for growers who want the compensation tuned. One point auto calibration: Against a 1413 uS/cm or 1382 mg/L standard, and it finds the value itself. Waterproof, and it floats: Which is the point of the sealed casing in a room full of open tanks. No pH on this one: EC, TDS and temperature only. A combined pen covers pH as well. Technical Specifications Specification Value Brand Hanna Instruments Product Name DiST 5 Part Number HI98311; SKU 716825 Type EC, TDS and temperature tester EC Range 0 to 3999 µS/cm EC Resolution 1 µS/cm EC Accuracy ±2% of full scale TDS Range 0 to 2000 mg/L, ppm TDS Resolution 1 mg/L Temperature Range 0.0 to 60.0 °C, 32.0 to 140.0 °F Temperature Resolution 0.1 °C Temperature Accuracy ±0.5 °C Calibration Automatic, one point at 1413 µS/cm or 1382 mg/L Temperature Compensation Automatic, beta adjustable 0.0 to 2.4% per °C Conversion Factor Adjustable, 0.45 to 1.00 Probe HI73311 graphite, replaceable Battery 4 x 1.5V, about 100 hours continuous Auto Shutoff After 8 minutes of non-use Housing Waterproof, floats Dimensions 163 x 40 x 26 mm, 6.4 x 1.6 x 1.0 in Weight 100 g, 3.5 oz In the Box Meter, graphite probe, conductivity and TDS standards, probe removal tool, batteries, certificate and manual Does Not Measure pH