Hanna Checker Electrode | Screw-On Spare pH Probe for HI98103

What the Hanna Checker Electrode Swaps Out The electrode unscrews from the meter body and a new one screws on. No tools, no soldering, nothing to open. The body is a slim 8 mm tube with a spherical tip. That is narrow enough to read inside a test tube or a sample vial, rather than needing a beaker. On the tester it serves, the Checker reads 0.0 to 14.0 pH at 0.1 resolution and ±0.2 accuracy. A fresh electrode is what keeps it inside that figure. Which Spare pH Electrode Your Checker Actually Takes Hanna has two parts here and they do not cross generations. Current HI98103 testers take the HI1271, which also covers the HI98100 and the HI98115. The HI1270 is the electrode for the earlier HI98103. Unscrew the one on your meter and read the number printed on it first. Keep the tip wet in storage solution between uses, never dry and never sitting in plain water. And treat it as a consumable rather than a repair. A glass electrode ages on the shelf as well as in the tank, so a spare kept years early is not really a spare. Key Features Screws on and off: Unscrew the spent electrode, screw the new one on. No tools and no calibration jig. Slim 8 mm body: Reads inside a test tube or a sample vial instead of needing a beaker. Spherical tip: The standard shape for general purpose pH work in small volumes. Two part numbers, one fitting: HI1271 for current Checkers, HI1270 for the earlier HI98103. Check before you replace: The number is printed on the electrode already fitted to your meter. Store it wet: Storage solution between uses. Dry or plain water both shorten its life. A consumable, not a repair: Glass electrodes age on the shelf as well as in the tank. Technical Specifications Specification Value Brand Hanna Instruments SKU 716436 Type Replacement pH electrode for Checker testers Fitting Screw-on, no tools required Body Diameter 8 mm Tip Shape Spherical Suited To Test tubes, vials and other small vessels Current Part HI1271, for HI98103, HI98100 and HI98115 Legacy Part HI1270, for the previous model of the HI98103 Host Meter pH Range 0.0 to 14.0 pH Host Meter Resolution 0.1 pH Host Meter Accuracy ±0.2 pH at 25 °C Host Meter Calibration Automatic, one or two point Storage Tip kept wet in storage solution, never dry or in plain water Note Confirm the part number printed on your existing electrode before replacing it