Growonix Tubing 1/2 White - 50' length

GrowoniX 1/2 in RO Tubing for High-Flow Water Lines This 50 ft roll of GrowoniX 1/2 in RO tubing is made from Linear Low-Density Polyethylene (LLDPE), a tougher resin than the standard low- or medium-density poly line found on most filtration kits. It's built from non-contaminating, FDA-compliant materials, carries NSF certification, and meets ASTM D-1693 (10% IGEPAL) for environmental stress-crack resistance, so it holds up to the constant pressure cycling of a reverse osmosis system without crazing at the fittings. The larger 1/2 in outer diameter moves more volume than 1/4 in line, which is what you want feeding high-flow GrowoniX systems and long reservoir runs, and it drops straight into 1/2 in push-to-connect ports with no adapters. Why Translucent White RO Tubing Helps You Read the Line The white wall is translucent on purpose. You can see water moving and spot cloudiness, air locks, or sediment without breaking a single fitting. Most growers route white on product-water lines and anywhere they want a visual check, and keep opaque black for runs sitting under direct grow-room light. The trade-off is that light passing through translucent line can encourage algae over time, so it's best kept out of constant direct lighting or shaded where exposure is high. The same LLDPE is rated for cold and intermittent hot water and pairs with quick-connect, compression, and standard barb fittings; this 50 ft roll covers a full system plumb, with 25 ft and 100 ft rolls available for smaller or larger jobs. Key Features LLDPE Construction: Linear low-density polyethylene resists stress cracking and kinking better than standard poly line. 1/2 in Outer Diameter: Larger bore for high-flow RO systems and long feed runs, fits 1/2 in standard and quick-connect fittings. Translucent White Wall: See flow, sediment, and air locks at a glance without opening a fitting. FDA-Compliant & NSF Certified: Non-contaminating materials safe for drinking-water and nutrient lines. 50 ft Roll: Enough length to plumb a full high-flow system, also offered in 25 ft and 100 ft. Technical Specifications Specification Value Material Linear Low-Density Polyethylene (LLDPE) Outer Diameter 1/2 in Length 50 ft Color White (translucent) Certifications FDA-compliant materials, NSF certified Stress-Crack Resistance ASTM D-1693 (10% IGEPAL) Water Compatibility Cold and intermittent hot water Fitting Compatibility Standard and quick-connect 1/2 in fittings