Growonix Booster pump for low inlet pressure on EX800-GX1000 filters, pressure regulated to 78 psi with 3...

GrowoniX BP-1000 Booster Pump for Low Inlet Pressure The GrowoniX BP-1000 booster pump solves low feed pressure on GrowoniX 600-1000 GPD filters. It lets the RO membrane hit full performance with as little as 0 PSI of incoming water. Output is adjustable and regulated to 78 PSI for these systems, with a 130 PSI ceiling. It runs on 24 VDC at 5.7A. An aluminum cooling jacket keeps motor temperature stable. Built to Feed EX800, EX/GX600, and EX/GX1000 Membranes Plumb it on the RO inlet ahead of the EX800, EX/GX600, or EX/GX1000 membrane housing. The 3/8" tube ports match the GrowoniX line, and it can even siphon. A high-pressure cutoff trips at 40 PSI on the RO line to protect the system. It runs an intermittent duty cycle. Dial in the regulator to match your membrane. Key Features Low-Pressure Fix: Full RO performance from as little as 0 PSI of incoming feed pressure. Adjustable Output, 78 PSI Regulated: Set to 78 PSI for these membranes, with a 130 PSI maximum. 1.2 GPM @ 80 PSI Flow: Sized for the EX800, EX/GX600, and EX/GX1000 filters. 24 VDC / 5.7A Power: About 137 watts at full pressure on low-voltage DC. Aluminum Thermal Cooling Jacket: Stabilizes motor temperature and protects the electronics. High-Pressure Cutoff + Siphon: Trips at 40 PSI on the RO line, and the pump can siphon. Technical Specifications Specification Value Model / SKU BP-1000 Fits in System EX800, EX/GX600, EX/GX1000 Port Size (In/Out) 3/8" Tube Max Flow Rate 1.2 GPM @ 80 PSI Max Output Pressure 130 PSI Regulated Output 78 PSI (adjustable) High Pressure Cutoff Yes (40 PSI RO line) Standard Voltage 24 VDC Amp Draw 5.7A @ 130 PSI (~137W) Duty Cycle Intermittent Dimensions (L x W x H) 8.85" x 4.00" x 4.05" Weight 6.4 lb