Growonix Booster Pump BP-1530 for EX100-GX600 filters. 3/8 Pressure Switch

Growonix BP-1530 Booster Pump for EX100-GX600 Filters The Growonix BP-1530 booster pump raises input water pressure to 78 PSI across every GrowoniX filter from the EX100 through the GX600. It pulls that off even when incoming pressure is low. Output runs up to 720 GPD at a 1:1 ratio. The pump is built for continuous duty, with overheat protection and a built-in high-pressure cutoff. That cutoff shuts the pump off on its own when you run a float valve, solenoid, or faucet. Rated for 12,000 hours of brush life, it also flushes membranes better. Pick the Right Fitting: 3/8 or 1/4 Inch This is the 3/8" version, sized for the EX600 and GX600 and any filter on 3/8" RO tubing. If your filter is 400 GPD and under, it runs 1/4" tubing, so choose the BP-1530-14 instead. Adjustable output pressure lets you dial in the membrane's sweet spot. The high-pressure cutoff means hands-off operation with a float valve or faucet. It needs only about 35 PSI of incoming pressure to reach full flow. Key Features 78 PSI feed boost: Brings RO feed pressure up to 78 PSI even from a low incoming supply. Up to 720 GPD: Boosts pure water production on filters 600 GPD and under at a 1:1 ratio. Adjustable output: Dial in the pressure that suits your membrane and water conditions. Continuous duty: Built for sustained operation with overheat protection. High-pressure cutoff: Shuts off automatically with a float valve, solenoid, or faucet. Long brush life: Rated for 12,000 hours of service. Better flushing: Higher pressure flushes membranes more thoroughly. 3/8" fitting: Sized for EX600/GX600 and other 3/8" RO tubing (use BP-1530-14 for 1/4"). Technical Specifications Specification Value Brand Growonix SKU BP-1530-38 Type RO feed booster pump Fitting 3/8" pressure switch (1/4" available as BP-1530-14) Output pressure Up to 78 PSI (adjustable) Max production Up to 720 GPD at 1:1 Minimum incoming pressure ~35 PSI Duty Continuous, with overheat protection Shutoff Built-in high-pressure cutoff (float valve / faucet) Brush life 12,000 hours Compatible with GrowoniX EX100–GX600 (3/8" RO tubing systems)