GrowLab GL120 Grow Tent | 3ft 11in Square, 6ft 7in Tall

What the GrowLab 120 Was Built Around The GL120 measures 3ft 11in square, and that figure was chosen deliberately. It takes a 3ft growing table with a margin on every side. That is enough to reach a drain fitting or a reservoir line without moving anything. Interior height is 6ft 7in. Roof cross-members carry 100 lb and slide along their rails, so a fixture can be centred over a table that is not itself centred. The frame is powder coated steel, thicker than the previous generation, and it resists the rust that comes with a humid room. Inside is silver Mylar, with the tent material returning 97 percent of radiant heat. Underneath sits a removable waterproof second floor, which comes out and gets hosed off between crops rather than being scrubbed in place. The boxed weight is 29 lb, so one person can carry and build it. Lighting and Airflow in a 4x4 Grow Tent This size is where a single fixture does the whole job and nothing is wasted. One full-size LED panel covers the footprint evenly at the hang height this ceiling allows. The movable cross-members let you set the spread rather than accept where a bar happens to sit. Airflow is the part people underestimate at this scale. A canopy this size in flower puts out real transpiration. A filter and fan sized to tent volume alone will lag behind it. Size the extraction to the light load, not to the cubic feet. The ports take standard duct diameters through adjustable attachments, so there is no fighting with reducers. Where this size stops working is plant training. Four plants trained wide will fill it and six will not, however the pots are arranged. That decision has to happen before the tent is even up. Key Features Footprint: 3ft 11in square, which takes a 3ft growing table with margin Height: 6ft 7in of interior height to work with Roof load: 100 lb across movable cross-members Shipping weight: 29 lb boxed, which is a one-person build Interior: A silver Mylar lining that is highly reflective and waterproof Thermal: The tent material reflects 97 percent of all radiant heat Frame: Powder coated steel, thicker than the previous generation and rust resistant Cross-members: Movable, snapping into place so a fixture can be repositioned Ports: Multiple intake and exhaust ports with adjustable ducting attachments Floor: A removable waterproof second floor, lifted out for cleaning between crops Technical Specifications Specification Value Model GL120 SKU 706835 Brand GrowLab Exterior dimensions 3ft 11in x 3ft 11in x 6ft 7in Roof load 100 lb across the cross-members Frame Powder coated steel Interior Silver Mylar Radiant heat reflected 97 percent Ducting Adjustable attachments, no clamps or reducers needed Floor Removable waterproof second floor Off-gassing None, the material is non-toxic under light and heat Shipping weight 29 lb Table fit Accommodates a 3ft growing table UPC 4260220920755