GreenBroz Harvest Bucket Dry Trimmer. Drill-Driven Bud Trimmer + Bucker

GreenBroz Harvest Bucket for Home Dry Trimming A stainless steel clamp locks over the rim of any standard 5 gallon bucket, and the trimming head sits on top. Dry flower loads from above, so you watch every bud the whole time it trims. A power drill fitted to the 3/8 in hex shaft turns the tines across a slotted trim plate. Patented top and bottom blades below the plate clip sugar leaf as buds roll over the slots. Clippings drop straight down into the bucket for easy collection. Processing tops out at about 4 lbs of dry flower per hour. The unit suits home harvests of around 15 lbs per season. Trimming parts are made from food safe 316 surgical stainless steel along with HDPE seats. Assembled, it measures 14 x 12 x 12 in and weighs about 10 lbs. Integrated bucking hooks on the clamp strip buds from the stem before they go into the trimmer. Speed, direction and how close the trim gets all stay under your control at the drill trigger. GreenBroz covers the unit with a 3 year warranty, and it is made in the USA. Getting a Clean Finish From a Bucket Trimmer Snap the clamp onto the bucket rim, squeeze the handles together and turn the latch to lock it. Drop the internal bucket into the clamp so the threaded studs pass through their slots. Fit the bottom blade first, then the top blade facing the opposite way. Set the trim plate over them and secure it with the wing nuts. Slide in the shaft with the tines resting on the plate. Chuck the hex shaft into your drill, keeping it straight, and seat it fully in both plastic seats. Load a modest handful of dry buds and run the drill clockwise. Keep the speed low, ideally between twenty and forty revolutions per minute. Higher speeds risk damage to the machine and to the flower. Stop once the buds look clean, then lift them out and load the next batch. Never reach into the trimming area until the drill is detached and set aside. Tie back long hair and keep loose sleeves or jewelry clear. The whole head breaks down by hand for cleaning without tools. Stainless parts can go in the dishwasher, while plastic seats are best washed with soap, water and a rough sponge. Key Features Fits a Standard Bucket: The clamp locks onto any common 5 gallon bucket, which catches the trim. Top-Loading Design: Buds stay in view from above, so you stop the moment they look right. Drill Driven: An ordinary power drill supplies the speed and direction you choose. 316 Stainless Steel: Food safe surgical stainless steel trimming parts resist buildup and clean easily. Built-In Bucking: Hooks on the clamp strip buds from stems before trimming. Tool-Free Teardown: The head comes apart by hand for quick cleaning between batches. Technical Specifications Specification Value Model GBHB Type Top-loading dry trimmer, batch feed Max processing 4 lbs (2 kg) dry flower per hour Suggested harvest size 15 lbs (7 kg) Dimensions 14 x 12 x 12 in (35 x 33 x 33 cm) Weight 10 lbs Drive Power drill, 3/8 in hex shaft Ideal speed 20 to 40 RPM, below 50 RPM Materials 316 surgical stainless steel, HDPE Bucket Attaches to a standard 5 gallon bucket (bucket not included) Bucking Integrated bucking hooks Cleaning Stainless blades and barrel dishwasher safe Warranty 3 years Made in USA