Green Air Products Total Humidity Controller Humidify & Dehumidify. Model THC-2

Green Air THC-2 Total Humidity Controller The THC-2 controls humidity automatically and switches between humidify and dehumidify modes. It powers your equipment whenever relative humidity varies from the adjustable set point. In dehumidify mode, high humidity runs your fans or dehumidifier until RH drops about 5%. Then it holds off until humidity climbs 5% again. Holding Grow Room Humidity in Either Direction Run it in dehumidify mode to pull damp air in late flower, or in humidify mode to add moisture during propagation. Wire your humidifier or dehumidifier through the controller and set the dial. The 5% span keeps the equipment from short-cycling on small swings. Place it where it reads average room air, not next to the mister or the intake. Key Features Humidify and dehumidify: One switch flips the controller between adding and removing moisture. Adjustable set point: Powers equipment whenever RH drifts from your target. 5% humidity span: Differential stops the gear from short-cycling on small swings. Works both stages: Adds moisture in propagation, pulls it in late flower. Simple dial control: Set the humidity target and let it run the equipment. Technical Specifications Specification Value Function Humidify + dehumidify controller Mode Switchable Humidity Span About 5% RH Control Adjustable set point (dial) Use Indoor grow spaces