Gorilla Grow Tent Gear Board 22mm | Fits Original Gorilla Poles

Read the 22mm Before Anything Else on a Gorilla Grow Tent Gear Board That number is the pole diameter, not the board thickness, and it is the whole compatibility rule. Gorilla builds frames in more than one gauge, so a board cut for 22mm poles will not clamp a 19mm or 16mm frame. Measure a pole first. This one fits the Original Gorilla line. It does not fit Gorilla Shorty tents, and it does not work with the 2 ft extension poles. What It Holds and Where It Sits Among Grow Tent Accessories The board snaps onto the existing frame rather than bolting through anything. Nothing gets drilled, and it comes off as easily as it went on. What goes up there is whatever is taking floor space right now. A large oscillating fan, an environmental controller, a CO2 monitor, a bank of timers. Getting that gear off the floor does more than tidy the room. Floor clutter blocks the low air movement that keeps the underside of the canopy dry. A meter sitting on the ground also reads the coldest, dampest air in the tent rather than the air the plants are actually living in. The board weighs 10 lbs on its own, before anything gets set on it. Mount it to poles that are properly seated and fully engaged at the corners. Among grow tent accessories this is one of the few that changes airflow and readings rather than only convenience. The 1 ft height extension poles come in the box. Key Features 22mm poles only: The number is the pole diameter and the compatibility rule. Measure your frame first. Fits the Original Gorilla line: Covers the 5x5, 4x8, 5x9, 8x8, 9x9, 10x10, 8x16 and 10x20 Original Gorilla sizes. Snaps on, no drilling: Clamps to poles already in the tent and comes back off just as easily. 1 ft height extension poles included: In the box. The 2 ft extension poles are a separate part and are not compatible. Holds fans, controllers and meters: Gets the heavy floor equipment up where it is out of the way of low airflow. Not for Gorilla Shorty tents: Shorty frames are a different build and this board will not fit them. Technical Specifications Specification Value Product Gorilla Grow Tent Grow Room Gear Board Pole Diameter 22mm Tent Line Original Gorilla Grow Tent Compatible Sizes 5x5, 4x8, 5x9, 8x8, 9x9, 10x10, 8x16, 10x20 Mounting Snaps onto existing tent poles Included 1 ft height extension poles Not Compatible Gorilla Shorty tents, 2 ft extension poles Board Weight 10 lbs Typical Load Oscillating fans, controllers, meters, monitors, timers