Gavita 8 ft 3 Pin Power Cord 277-480 V

Gavita 8 ft 3 Pin Power Cord 277-480V for Commercial Grow Rooms Commercial cultivation panels typically run 277V single-phase, 240V three-phase, or 480V three-phase. This 8 ft (2.4 m) cord is the high-voltage variant for the newer Gavita 3-pin LED generation. The fixture-side 3-pin proprietary connector mates to CT 2000e, RS 2400e and the second-gen 1700e/1930e family. The breaker end is open lead so an electrician terminates to the room's locking outlet or hard-wired junction. Why 277-480V Wiring Wins in Multi-Light Rooms Higher voltage means lower current per fixture. More lights per circuit, less voltage drop across long ceiling runs, tighter copper sizing on the budget. A 1000W LED on 480V draws roughly half the current it would on 240V. Trade-off matters here. 480V wiring is not homeowner-DIY territory. Growers typically pull permits and hire a licensed commercial electrician before this cord gets terminated. Key Features Length: 8 ft (2.4 m), standard drop from ceiling to wall outlet or junction Voltage range: 277-480V — covers commercial 277V single-phase and 480V three-phase panels Fixture connector: Gavita 3-pin LED inlet, paired to the newer CT 2000e and RS 2400e generation Breaker end: Open/bare lead for electrician termination to L7-15P, L8-15P, or hard-wired junction Build use: Commercial multi-light rooms where lower current per circuit lets more fixtures share a breaker Technical Specifications Specification Value Length 8 ft (2.4 m) Voltage Range 277-480V Fixture Connector Gavita 3-pin proprietary Breaker End Open/bare lead Compatibility Gavita CT 2000e, RS 2400e, second-gen 1700e/CT 1930e (3-pin generation)