Gavita 5 Pin to 3 Pin Power Cord Adapter

Gavita 5 Pin to 3 Pin Power Cord Adapter for Mixed LED Rooms Some rooms run a mix of legacy 5-pin Gavita LEDs and the newer 3-pin generation. Legacy fixtures: RS 1900e, 1700e, 900e, CT 1930e. Newer fixtures: CT 2000e, RS 2400e onward. This adapter lets a single set of 5-pin cords feed both. It bridges the older Wieland RST 16i5 to the newer 3-pin inlet. The room does not have to rewire just to mix generations. When the 5-Pin to 3-Pin Adapter Is Worth Reaching For Practical case: a 24-light room built around 5-pin RS 1900e fixtures. One unit fails. The warranty replacement ships as a 3-pin CT 1930e. Without the adapter, that one fixture needs a different cord, a different inventory line, and a separate spare. With the adapter, the existing 5-pin cord runs straight to the new fixture. Growers typically keep one or two adapters on hand. Worth flagging though. Confirm the original cord's voltage rating matches the replacement fixture's spec before plugging in. Key Features Connector mapping: Bridges legacy 5-pin Wieland RST 16i5 to the newer Gavita 3-pin LED inlet Compatible legacy fixtures (5-pin side): Gavita Pro RS 1900e, 1700e, 900e, CT 1930e Compatible newer fixtures (3-pin side): Gavita CT 2000e, RS 2400e generation 3-pin LEDs Inventory simplification: Lets a mixed-generation room run on one set of power cords instead of two Voltage check: Match the original cord's voltage rating to the new fixture's spec before installation Technical Specifications Specification Value Function 5-pin to 3-pin Gavita LED power cord adapter 5-Pin Side Wieland RST 16i5 3-Pin Side Gavita LED 3-pin inlet Bridge Use Run legacy 5-pin cords on newer 3-pin fixtures (or vice versa)