Futurola KB100 Crowning Tool, 109 mm Standard. Closes 100 Cones

What a Dutch Crown Device Does, and What It Does Not Crowning is the last physical step in making a cone, and it is the closing of the open end after filling. This tool does a hundred of them at once, which is the whole reason it exists at commercial scale. It is not a filling machine and it does not seal anything with glue or heat. The part number here is F01-KB100, and Futurola's KB100 line is built around the Knockbox 100, which fills a hundred cones in about two minutes. Six sizes exist as separate part numbers: 60 mm and 70 mm mini, 84 mm standard, 98 mm slender, 98 mm slim and 109 mm standard. This is one size rather than a choice of six, so check the length first. The function is a hundred crowns per cycle. Matching the Tool to Your Pre-Rolled Cones Pre-rolled cones come in fixed lengths and diameters, and a crowning tool is cut to one of them. Choose the size that matches the cone you actually run, because a longer tool leaves too much paper and a shorter one crushes the shoulder. The Knockbox 100 it pairs with handles cone diameters of 18, 24, 30 and 36 mm. It comes as a base with a controller, a power adapter, a filling kit and a mix tray. Its cycle is adjustable between sixty and ninety seconds depending on the density you want. So the realistic throughput of a line is the fill cycle plus the crowning pass, not the crowning alone. Plan the bench around the tray, since the tray is what carries a hundred cones from one station to the next. Keep one tool per cone size rather than trying to make one do two jobs. Anyone filling by hand in small batches will not get the value out of this, and a hand crowner costs a fraction. It is a production tool for a line that already runs full trays. At that scale it removes the slowest manual step in the room. Key Features What it does: Closes the open end of a hundred filled cones per cycle What it is not: Not a filling machine, and it uses no glue or heat This size: The 109 mm standard length Other sizes: 60 mm and 70 mm mini, 84 mm standard, 98 mm slender, 98 mm slim Interchangeable: No, a tool is cut for one cone length Paired machine: The Futurola Knockbox 100, not a 3100 Knockbox fill rate: About a hundred cones in two minutes Knockbox cycle: Adjustable between sixty and ninety seconds Cone diameters on that machine: 18, 24, 30 and 36 mm Technical Specifications Specification Value SKU F01-KB100 Brand Futurola Product Crowning device for filled cones Size 109 mm standard Capacity 100 cones per cycle Function Closes the open end; it does not fill, glue or heat seal Sizes in the range 60 mm mini, 70 mm mini, 84 mm standard, 98 mm slender, 98 mm slim, 109 mm standard Paired machine Futurola Knockbox 100 Knockbox 100 output 100 cones in about 2 minutes Knockbox 100 cycle 60 to 90 seconds, adjustable Knockbox 100 cone diameters 18, 24, 30 and 36 mm Knockbox 100 base includes Base, controller, power adapter, filling kit and mix tray