Fast Fit Tray Stand 3 ft x 3 ft | 3x3 Flood Table Stand, Tool-Free

Choosing a 3x3 Flood Table Stand for a Square Tent Square tents are the awkward case. Most benches are built long and narrow. A three by three space then gets a bench that overhangs the zipper, or two small tables with a seam down the middle. This frame is cut square on purpose. Outside it measures 41.3 x 41.3 in, and the inside opening is 39.3 x 39.3 in, which is the inside dimension a standard three foot tray needs. It weighs about 37 lbs assembled, all of it heavy gauge steel under a powder coated white finish. Overall height is 25 in with 18 in of clear floor space under the bottom bar. Assembly is the part people notice first. The legs and rails interlock and pull tight under load, so there is no hardware, no bracket and nothing to lose on the floor. Five minutes is a fair estimate rather than a marketing one. The white finish holds up under the constant damp that lives beneath a flood tray. Lesser painted frames tend to bloom rust there in the second year. Running a Hydroponic Tray Stand in a Tight Footprint A hydroponic tray stand in this size usually ends up doing two jobs. It carries the tray on top and hides the reservoir underneath. In a three by three tent that is the difference between a workable room and one where you cannot reach the pump. Check the floor before the tray goes on. Level matters more on a square table than a long one. There is no length for water to run out of a corner, so a low spot just sits there. Shim the legs if the slab is off. Casters are an option rather than a fitting, and in a tent they are worth it. Being able to roll the whole bench out through the door beats crawling under it with a wrench when a fitting starts weeping. The trade off is honest enough. This size is deliberately small. If you are running a four by four tent, the square frame leaves you short and the larger footprint is the better call. Trays are sold separately, and brands differ slightly in their inside dimension. Measure yours against the opening rather than trusting the label on the box. Key Features Square 39.3 in opening: Matches a standard three foot tray without the overhang a rectangular bench leaves. Tool free interlocking frame: Legs and rails pull tight under load, so nothing needs a wrench or a spare bracket. About 37 lbs of steel: Enough mass that a loaded tray and a full reservoir do not set it walking. 25 in working height: Keeps the canopy at a height you can inspect without kneeling on a wet floor. 18 in under the bottom bar: Fits the reservoir, pump and jugs beneath the tray instead of beside it. Powder coated white finish: Survives the permanent damp under a flood tray and reflects light back upward. Technical Specifications Specification Value Brand Fast Fit Model Tray Stand, 3 ft x 3 ft Part Number 706121 Outside Dimensions 41.3 x 41.3 in Inside Dimensions 39.3 x 39.3 in Overall Height 25 in Bottom Bar to Floor 18 in without casters Weight About 37 lbs Frame Heavy gauge steel, interlocking Finish Powder coated white Assembly Tool free, about 5 minutes Tray Compatibility Standard inside dimension trays and reservoirs, sold separately Casters Optional locking caster kit, sold separately UPC 847127003183