EcoPlus Commercial Grade Chiller Fitting Kit | 1 Inch Connections

When an EcoPlus Chiller Fitting Kit Saves a Crop Fittings are the part of a chiller install that fails first, and the least costly thing on the machine. This kit matches the 1 in connections used across the EcoPlus Commercial Grade chillers, the ones that accept either rigid PVC pipe or flexible tubing. Each chiller ships with two of them, which is exactly enough and no spare. Cross-thread one during a rushed install, or crack one when a line freezes, and the chiller is offline until a replacement arrives. Smaller EcoPlus units use different sizes, half inch on the 1/10 HP and three quarter inch on the 1/4 and 1/2 HP. Check the chiller before matching a kit to it. Keeping 1 Inch Chiller Fittings on the Shelf Spare 1 inch chiller fittings belong in the same box as spare impellers and a length of tubing. The failure always comes at the least convenient moment. A reservoir without cooling in a warm room climbs fast, and warm nutrient solution holds less oxygen while giving root pathogens the conditions they want. Wrap the threads properly on refit and hand-tighten rather than wrenching, since over-torquing plastic is what cracks the next one. Pressure-test the loop with water before putting the tank back into service. It is a small part, and that is the whole point of keeping one. Key Features One inch connections: Matches the fitting size used on EcoPlus Commercial Grade chillers. Rigid or flexible: The same connector accepts hard PVC pipe or flexible tubing. Direct replacement: Swaps for the fittings supplied with the chiller, with no adapters in between. Downtime insurance: One spare on the shelf keeps a cracked fitting from stopping a reservoir loop. Check the size first: Smaller EcoPlus chillers use half inch or three quarter inch connections instead. Technical Specifications Specification Value Brand EcoPlus Product Commercial Grade Chiller Fitting Kit Part Number 728711 Fitting Size 1 in Compatible With EcoPlus Commercial Grade water chillers Accepts Rigid PVC pipe or flexible tubing Other Sizes in the Range 1/2 in for the 1/10 HP, 3/4 in for the 1/4 and 1/2 HP