CVault 2 Liter Humidity Curing Storage Container, 7 x 4

CVault 2L Curing Storage Container Holds Three Ounces Light-Tight Two liters of 18/10 food-grade stainless steel, 7" across and 4" deep, closed by a ¼" silicone gasket and a latch pulled airtight. Around three ounces of dry plant material sits inside with no light reaching it at all. That matters more than most people expect over a long hold. Light and air are the two things that take color and aroma out of stored material, and this closes both off in one step. It is the smallest of the liter sizes, under the 4 L at half a pound and the 8 L at a pound. Above it sit the personal Small, Medium and Large, which are measured in fractions of an ounce. Three ounces is the quantity a jar handles badly and a tote handles worse. A Light-Tight Curing Container Sized for Three Ounces The 67 g 62% RH Boveda in the box is rated to a full pound. On a three-ounce load it is heavily oversized and holds RH flat for months. Boveda's own guidance is that you cannot use too much of it, and this pairing is a clear case of that working in your favor. Stack several and mark the lids in non-permanent marker to keep batches straight. The steel body does pick up fingerprints, which is cosmetic and nothing more. The pack sits in a lid holder rather than among the contents, so nothing rests on what is stored. Accuracy holds at ±2% of the labeled figure in a container sealed this well. Replace the pack when it turns granular and then hard, roughly every three months. That is the whole routine for curing in one of these. Key Features 18/10 Food-Grade Stainless Steel: Holds no odor and takes commercial handling without denting like thin-wall tins. Completely Light-Tight Body: Blocks the UV that fades and degrades material sitting in clear glass. ¼" Silicone Gasket Seal: Pulls flat under the latch so ambient air does not creep in between openings. Lid-Mounted Boveda Holder: Keeps the pack off the contents and out of the way when scooping. 2 L Capacity: Sized at about 3 oz of dry plant material, under a pack rated for a full pound. Writable Lid Surface: Non-permanent marker wipes off, so one container follows several batches. Stackable Body: Vertical storage keeps a cure room organized without extra shelving. Airtight Locking Latch: Seals aroma in rather than letting it bleed into the room over weeks. Technical Specifications Specification Value Capacity 2 L Interior Diameter 7" (20 cm) Depth / Height 4" (10 cm) Dry Material Capacity about 3 oz of dry plant material Included Humidity Pack One (1) 67 g 62% RH Boveda pack included Material 18/10 food-grade stainless steel Light Transmission Opaque — fully light-tight Lid Seal ¼" wide silicone gasket Latch Engineered locking latch for an airtight seal Lid Pak Holder Built-in shelf sized for a Boveda / Humidipak Lid Surface Writable with a non-permanent marker, relabel as contents change Stackable Yes Boveda RH Accuracy ±2% of labeled RH in an airtight container Boveda Composition Food-grade salt, purified water and a food-grade thickening agent Boveda Replacement Every ~3 months; typical in-use life 2–4 months Manufacturer FreshStor (CVault) SKU CVAULT2L How Much Can a CVault 2L Hold? About three ounces of dry plant material. The Large personal size holds roughly one ounce and the 4 L moves up to eight. Is the 67 g Boveda Oversized for a 2L? Deliberately. It is rated to a pound, so at three ounces it holds 62% RH steady far longer between replacements. Does the CVault 2L Block Light Completely? Yes. The stainless body is fully opaque, unlike glass jars where UV gradually degrades stored material. How Do I Keep Multiple CVaults Organized? Write directly on the lid with a non-permanent marker and stack them; the surface wipes clean when contents change.