Common Culture Trojan 2 Inch Straight Scissors | Spring Loaded, Extra Spring

What the Trojan 2 Inch Straight Scissors Are Built From The blade is 2 in of stainless steel, ground straight, with a fine point at the tip. Stainless resists rust, which matters for a tool that spends its working life wet with plant sap and gets rinsed between sessions. The handles are textured so a sticky grip does not slide, and they are shaped to sit in the hand rather than press into it. A spring sits between the handles. Squeeze to cut, let go, and the spring opens the blades for the next snip without any effort from the hand. That is where the fatigue saving comes from across a long trimming day. Springs are the part that wears, so Common Culture packs a second one in the box. When the first loses its push or pops out, the spare goes in and the scissors carry on. The part number is GHSC2. At the price, keeping several pairs on the bench is the normal way to run them. The straight blade is the general one. It reaches into a dense flower for the fine work. A straight tip does not catch on a neighbouring stem the way a curved one can. Small plants, bonsai, herbs, and cuttings for cloning all come under the same tool. Keeping Spring Loaded Trimming Scissors Cutting Clean Spring loaded trimming scissors stop cutting cleanly long before they go blunt, because resin builds on the blades and glues them. The fix is a wipe with isopropyl alcohol on a cloth every so often through the session. A gummed pair makes the hand work harder on every cut, and the fatigue shows up as sloppy trimming by the afternoon. Keep two or three pairs going at a harvest and rotate them. One cuts while another soaks, and the soaking pair is clean and ready by the time the working pair gums up. Dry them before they go back in the drawer. Stainless resists rust but a wet blade folded shut against another wet blade overnight is asking for a stain along the edge. Watch the spring as the weeks go on. When the blades start to stay shut after a cut, or the spring pops out of its seat, swap in the spare. Fit the new one with the scissors open and the ends seated in their notches. Cut with the tip for detail work and the base of the blade for stems, since the leverage is at the base. A light hand gets more out of a short blade than a hard squeeze does. Trim over a tray with a screen in it, so what falls from the blades is caught rather than lost. Key Features 2 in straight blade: Stainless steel, ground straight to a fine tip. Spring loaded: The spring opens the blades after each cut, so the hand only closes them. Extra spring in the box: A second spring to fit when the first wears out. Textured handles: A grip that holds when the fingers are sticky with resin. Rust resistant: Stainless stands up to sap and a rinse between sessions. Fine detail work: A straight tip reaches into a dense flower without snagging. One of several on the bench: Priced so a harvest crew can rotate pairs through a soak. Technical Specifications Specification Value Brand Common Culture SKU GHSC2 Blade 2 in, straight Blade material Stainless steel, rust resistant Handles Textured, ergonomic, spring loaded Included 1 pair of scissors, 1 extra spring Uses Trimming, shaping, cloning cuts, bonsai, herbs