CenturionPro Original Trimmer | Hybrid Wet & Dry, 3 HP Leaf Collector

How the CenturionPro Original Trimmer Is Built The Original is a single-tumbler trimmer sized for steady commercial harvests, and it handles wet or dry flower. Its dual-purpose hybrid tumbler is 30 in long and about 6.5 in across, made from 16-gauge 304 stainless steel. A hardened steel reel with 11 blades turns beneath it at 37,500 cuts per minute. Rated output is up to 50 lbs per hour wet or 10 lbs per hour dry. A 3 HP leaf collector pulls 2,750 CFM through two 4 in food grade hoses, drawing leaf onto the reel. A diverter fine tunes that airflow for different strains and densities. Trim then separates in the triple-bag system, with leafy trim in the inner bag and kief in the micron bag. The body is black anodized aluminum with stainless steel components, fed from a large hopper. The trimmer measures 30 x 13 x 28 in and runs on 110V power. The leaf collector measures 18.5 x 20 x 20 in and draws 15 amps. The trimmer carries a 10-year warranty and the leaf collector three years. Running the Centurion Pro Original Through Harvest The Centurion Pro Original suits growers who want a full-size tumbler on a single machine. Give the leaf collector its own circuit, apart from the trimmer. For dry trimming, aim for flower at about 11% moisture, with 8 to 13% still workable. Wet flower can go straight in after bucking and fan leaf removal. Feed the hopper at an even rate, since a steady feed does more for finish quality than any setting. Open the diverter for airy flower and close it down for dense flower that needs a tighter cut. Expect real output to vary with strain, moisture and how closely the flower must be finished. Empty the micron bag often during long sessions to keep suction strong. Pressure wash the body after the run, and wash the tumbler by hand in warm, soapy water. Check the reel and blades between harvests so the cut stays clean. Key Features Hybrid wet and dry tumbler: One 30 in stainless tumbler handles both. 11-blade hardened steel reel: Makes 37,500 cuts per minute. 3 HP leaf collector: Pulls 2,750 CFM through food grade hoses. Adjustable diverter: Tunes airflow to each strain and density. Triple-bag collection: Separates leafy trim from kief. Long warranty: Ten years on the trimmer and three on the leaf collector. Technical Specifications Specification Value Brand CenturionPro Model Original Part number CP-3000 Tumbler 1 dual-purpose hybrid, 30 in long, about 6.5 in diameter Tumbler material 16-gauge 304 stainless steel Cutting reel Hardened steel, 11 blades Cuts per minute 37,500 Throughput Up to 50 lbs/hr wet, 10 lbs/hr dry Trimmer dimensions 30 x 13 x 28 in Trimmer power 110V Leaf collector 3 HP, 2,750 CFM, 15A Leaf collector dimensions 18.5 x 20 x 20 in Hoses 2 x 4 in food grade Body Black anodized aluminum, stainless steel Included Trimmer, hybrid tumbler, leaf collector, triple-bag system, hopper Warranty Trimmer 10 years, leaf collector 3 years