CenturionPro Mini Dry Tumbler | Quantanium 1/4 in, 304 Stainless

Where the CenturionPro Mini Dry Tumbler Fits One machine takes it: the Mini. CenturionPro builds a separate 30 in barrel for the Original, Silver Bullet and Gladiator, so the two do not swap. This one runs 6.5 in across in 16 gauge 304 stainless, with the 1/4 in slot pattern cut for material trimmed after drying. The Mini itself moves about 7 lbs an hour dry, and 35 wet. What the Quantanium Coating Changes at the Barrel Resin is the reason it is there. Quantanium is a PPG non-stick, an internally reinforced PTFE film run 0.0010 to 0.0015 in thick, formulated without PFOA and rated FDA conforming. Trichome retention runs 40% higher than an uncoated barrel, and no spray or oil is needed to get there. In practice that is a wipe with warm water between runs instead of a stop to scrape. Two cautions. Never pressure wash it, because the coating flakes off; soak it in warm soapy water and wipe with a soft cloth. And the 10 year machine warranty excludes consumable parts, tumblers among them. Run the barrel 40 to 50% full, with flower 80 to 90% dry and the leaf still pliable. Key Features Fits the Mini alone: The Original, Silver Bullet and Gladiator take a longer 30 in barrel. 1/4 in slot, dry build: The slot pattern CenturionPro cut for material trimmed after drying. 16 gauge 304 stainless: The substrate under the coating, at 6.5 in across the barrel. Quantanium non-stick: A PPG reinforced PTFE film, PFOA free and rated FDA conforming. 40% more trichome kept: Measured against a bare barrel, with no spray or oil. Wipe it, never pressure wash: Warm soapy water and a soft cloth. Pressure lifts the coating. Outside the 10 year term: That warranty covers machines. Tumblers count as consumable parts. Technical Specifications Specification Value Brand CenturionPro Part Number CP-2035 Type Slotted tumbler barrel, dry build Slot Width 1/4 in Barrel Diameter 6.5 in Barrel Length 28 in Substrate 16 gauge 304 stainless steel Coating Quantanium, PPG reinforced PTFE Coating Thickness 0.0010 to 0.0015 in PFOA Not used in the formulation Food Contact Rated FDA conforming Max Coating Temperature 500 F Fits CenturionPro Mini Does Not Fit Original, Silver Bullet, Gladiator Tumblers Per Mini 1 Mini Throughput 35 lbs/hr wet, 7 lbs/hr dry Fill Level 40 to 50% of the barrel Material Dryness 80 to 90% dry, leaf pliable Cleaning Soak in warm soapy water and wipe. No pressure washing Warranty Note Machine warranty excludes consumable tumblers