CenturionPro Gladiator SS Stainless Steel Trimmer, 75 lbs/hr Wet

A Dual Tumbler Trimmer for Rooms That Outgrew One Drum Two reels running side by side change the shape of a harvest day. The Gladiator SS carries a pair of tumblers, each 6.5 in across and 30 in long. Together they take up to 75 lbs of wet flower per hour, or 15 lbs of cured material. Cut rate spans 11,000 to 110,000 per minute across both reels. One operator still runs the whole thing. A 4 HP leaf collector moves 3,500 CFM, which is what keeps leaf out of the finished pile at that feed rate. The machine draws 7 Amp on a 110V circuit in North America. Its footprint widens to 25 in to fit the second drum, while length stays at 30 in. Weight climbs to 201 lbs, so plan on a pallet jack or two strong backs. Planning Around a High Volume Harvest Machine Throughput is only useful if the room upstream can feed it. Bucking has to keep pace, or the hopper sits empty half the shift. Most crews pair this unit with a dedicated bucker and one person staging totes. Cleaning intervals matter more here because resin accumulates across two reels instead of one. The bearings are sealed food-grade stainless, so there is nothing to grease between runs. Every wetted surface is 304 stainless or electroless nickel plated aluminum, and the hopper is food-grade plastic. Rail kits link a second or third unit end to end for larger operations. A double setup stretches to 73 in long and 470 lbs. The triple runs 105 in and 690 lbs, which is a freight and floor-load conversation before it is a trimming one. Key Features Two Tumblers: 6.5 in diameter and 30 in long each, electroless nickel plated Speed Control: 11,000 to 110,000 cuts per minute across both reels Throughput: up to 75 lbs of wet flower or 15 lbs of dry material per hour Leaf Collector: 4 HP motor moving 3,500 CFM, with a 3 year warranty Construction: 304 stainless steel with electroless nickel plated aluminum body and lid Sealed Bearings: maintenance-free food-grade stainless in a double sealed chamber Rail Ready: double system 73 in and 470 lbs, triple system 105 in and 690 lbs Footprint: 30 in x 25 in x 28 in and 201 lbs Technical Specifications Specification Value Processing Capability (up to, per hour) Wet: 75 lbs/hr · Dry: 15 lbs/hr Cuts Per Minute 11,000 to 110,000 Number of Tumblers 2 Tumbler Diameter 2 x 6.5 in Tumbler Length 2 x 30 in Dimensions (L x W x H) 30 in x 25 in x 28 in Weight 201 lbs Input Voltage 7 Amp at 110V (NA) · 3.5 Amp at 220V (EU/AUS) Leaf Collector 4 HP, 3,500 CFM Hopper Food Grade Plastic Body and Lid Electroless Nickel Plated Aluminum Cutting Reel Nitrided Reel Bearings Food Grade Stainless Steel Warranty 10 years machine · 3 years leaf collector · 2 years VSC