Home›Garden & Cultivation›Grow Equipment›CenturionPro Gladiator Quantanium Tumbler Upgrade | Both Drums

In Stock
CenturionPro Gladiator Quantanium Tumbler Upgrade | Both Drums
☆☆☆☆☆
Department: Garden & Cultivation
$650.00
What the Gladiator Quantanium Tumbler Upgrade Changes
A trimming drum is where trichomes either stay on the flower or stay on the machine. Bare stainless is smooth, but resin still finds it, and by the second hour of a run the inner wall is coated.
Purchase directly from Growers HouseWhat the Gladiator Quantanium Tumbler Upgrade Changes
A trimming drum is where trichomes either stay on the flower or stay on the machine. Bare stainless is smooth, but resin still finds it, and by the second hour of a run the inner wall is coated. Operators have historically answered that with a release spray, which solves the sticking and ruins the kief at the same time. The Quantanium coating answers it differently. The surface is genuinely non-stick, so resin does not bond to the drum wall in the first place. The preservation gain is roughly forty percent against an electropolished tumbler. Both drums on the machine carry the coating under this upgrade, since running one coated and one bare would only shift the problem. Each drum measures six and a half inches across and thirty inches long. Cleaning drops to a wipe with warm water rather than a solvent and a scrub.
Why a CenturionPro Gladiator Earns the Coated Drums
This machine is a production tool before it is anything else. Wet throughput reaches 75 lbs per hour and dry runs at 15 lbs per hour, which is a lot of material passing a lot of steel. At that volume, a percentage point of resin retention stops being an abstraction and starts being grams per shift. The kief question matters just as much for anyone selling concentrate. Material that comes off a sprayed drum carries whatever was sprayed, and that shows up in an extraction lab report. A coated drum keeps the collected pollen clean enough to sell on its own. Downtime is the second argument. A machine that needs a mid-run scrub is a machine that is not trimming, and on a harvest schedule that hour is expensive. The upgrade is specified at the time the machine is configured, which is the least expensive moment to do it. Retrofitting later means paying for drums outright rather than the difference.
Key Features
Non-Stick Quantanium Surface: Resin does not bond to the drum wall, so trichomes stay on the flower instead of the machine.
Forty Percent Better Preservation: The coated drum is rated well ahead of an electropolished tumbler on material retention.
No Release Spray: Nothing is applied to the drum, which keeps collected pollen clean enough for extraction work.
Covers Both Drums: The upgrade coats the pair rather than one, so neither side of the machine becomes the bottleneck.
Faster Cleaning: A wipe with warm water replaces the solvent and scrub routine between strains or shifts.
Built for Volume: At 75 lbs per hour wet, retained resin adds up to real weight across a single harvest shift.
Same Drum Geometry: Each tumbler keeps the standard six and a half inch bore and thirty inch length.
Technical Specifications
Specification
Value
Fits
CenturionPro Gladiator
Coverage
Both tumblers
Coating
Quantanium non-stick
Tumbler Dimensions
6.5 in diameter x 30 in length
Base Material
Stainless steel
Trichome Preservation
Approx. 40% greater than electropolished
Release Agent
None required
Cleaning
Warm water wipe-down
Machine Wet Throughput
Up to 75 lbs per hour
Machine Dry Throughput
15 lbs per hour






