CenturionPro GC3 Bucker Conveyor | Variable Speed, 110V, Part CP-12500

What a Bucking Machine Conveyor Removes From a Harvest Crew A bucker without a conveyor needs a person standing at the outfeed with a tote. That person is not adding value; they are moving material from one machine to the next, and they stop when the tote is full. A belt does the same job continuously and does not get tired on the third hour. The real gain is not the labour hour saved. It is that the bucker can run at its own pace instead of the pace of whoever is emptying it. Variable speed is the part that makes this work in practice. Set the belt slow and material backs up in a controlled queue for a hand inspection. Set it fast and the bucker clears straight into the next machine. Matching belt speed to the slowest station in the line is how you stop a bottleneck forming at the bucker outfeed. Weight is 30 lbs, which matters more than it sounds. One person can lift and reposition it, so a line layout is not permanent. Fitment Across a CenturionPro Harvest Line Conveyor Setup The same part fits the GC1 and GC3 from the Gentle Cut range, and the HP1 and HP3 as well. That is four machines, so an HP bucker runs it too. The part number is the same across all of them: CP-12500. Power is the other thing to settle before anything is specified. The standard unit is 110V at 60 Hz, which is a plug-in load. A 220V build at 50 Hz is built on request. One point of framing matters too. This is an accessory, not a machine, and it does nothing on its own. It has no bucking function and it does not trim. A bucker and somewhere for the material to go are both prerequisites. Priced against the bucker it sits beside, a conveyor is the least costly throughput you can add to a harvest line. It removes a person from a job a belt does better. Key Features Part CP-12500: The same part number across every machine it fits. Fits four machines, not two: GC1 and GC3 from Gentle Cut, HP1 and HP3 from High Performance. Variable speed control: Match the belt to the slowest station rather than to the bucker. Standard 110V at 60 Hz: A plug-in load with no hard wiring and no controller needed. 220V 50 Hz on request: Built on request. 30 lbs: Light enough for one person to lift and reposition a line. Takes a person off the outfeed: A belt runs continuously; somebody with a tote does not. An accessory, not a machine: It needs a bucker in front of it and a station behind it. Technical Specifications Specification Value SKU CP-12500 Brand CenturionPro Solutions Product Bucker outfeed conveyor, accessory Compatible machines GC1, GC3, HP1 and HP3 buckers Speed control Variable Standard power 110V, 60 Hz Alternate power 220V, 50 Hz, built on request Weight 30 lbs Function Outfeed and quality control; it does not buck or trim