CenturionPro 3.0+ Trimmer. Hybrid Wet & Dry, 8 HP Leaf Collector, VSC

How the CenturionPro 3.0+ Trimmer Is Built This commercial tumble trimmer runs three dual-purpose hybrid tumblers side by side, each 6.5 in across and 38 in long. The tumblers take wet or dry flower, so one machine covers both harvest styles. Rated output is up to 125 lbs per hour wet or 25 lbs per hour dry. Variable speed control comes standard and sets the cutting rate anywhere from 20,000 to 200,000 cuts per minute. Higher speeds suit wet or resin-heavy flower, while lower speeds suit dried flower. An 8 HP three-phase leaf collector moves 7,105 CFM to pull leaf onto the reels for a close cut. Trim and kief then separate in CenturionPro's triple-bag collection system. The trimmer body is anodized aluminum and stainless steel, fed from a mesh hopper. The trimmer measures 36 x 36 x 28 in and runs on 110V at 13 amps. The leaf collector measures 29 x 28 x 25 in and draws 21 amps on 220V three-phase power. The trimmer carries a 10-year warranty, the leaf collector three years and the speed control two years. Setting Up a Centurion Trimmer for Commercial Runs A Centurion trimmer this size belongs in a dedicated processing room with three-phase service on hand. Plan the electrical first, since the blower cord ships without a plug and needs one wired on by an electrician. Put the trimmer on its own standard circuit, separate from the leaf collector. Leave room around the machine for staff to load the hopper and swap collection bags. For dry trimming, aim for flower at about 11% moisture, with 8 to 13% still workable. Start a new batch at a lower speed, check the cut, then raise the rate for as long as the cut stays clean. Feed the hopper evenly so all three tumblers stay loaded. Empty the micron bag on a schedule, since kief builds up fast at commercial volumes. Pressure wash the body after a run, and wash the tumblers by hand. Keep spare bed bar blades, reel bearings and a belt on the shelf so a worn part never stops a harvest. Key Features Three hybrid tumblers: Each 6.5 x 38 in, for wet or dry flower. Up to 125 lbs/hr wet: Or up to 25 lbs/hr dry on a single machine. Variable speed control: Sets 20,000 to 200,000 cuts per minute. 8 HP leaf collector: Moves 7,105 CFM on three-phase power. Triple-bag collection: Separates leafy trim from kief. Long warranty: Ten years on the trimmer and three on the leaf collector. Technical Specifications Specification Value Brand CenturionPro Model 3.0+ Part number CP-6100 Tumblers 3 dual-purpose hybrid, 6.5 in diameter, 38 in long Throughput Up to 125 lbs/hr wet, 25 lbs/hr dry Cuts per minute 20,000 to 200,000 Speed control Variable, included Trimmer power 110V, 13A Trimmer dimensions 36 x 36 x 28 in Leaf collector 8 HP, 7,105 CFM, three-phase 220V, 21A Leaf collector dimensions 29 x 28 x 25 in Hopper Mesh Body Anodized aluminum and stainless steel Warranty Trimmer 10 years, leaf collector 3 years, speed control 2 years