Botanicare Horti-Trellis Plant Support Netting 4 x 16 ft | 6 in Mesh

Covering a Bench Run With the Botanicare Horti-Trellis 4 x 16 ft Two tables end to end need 16 ft of net, and this is that length in a single piece of pliable plastic. Squares are 6 in across the whole 4 ft width, the same geometry as the shorter cuts, just without a join in the middle. That matters at canopy height, because a seam is where branches catch and where the net sags first under weight. Handling a 16 ft Trellis Netting Run Without Help A length this size is genuinely awkward to hang alone, and most growers clip one end before unrolling the rest along the bench. Once it is up, the plastic behaves like any shorter piece. It comes off the plants clean, washes and goes back up next cycle. Anyone working a single tent will find this more net than the space calls for, and the shorter cut is the better match. Key Features 4 ft x 16 ft in one piece: Spans two benches or a greenhouse row with no seam for branches to catch on. 6 in squares: Consistent across the full width, so weaving and defoliation feel the same at either end of the run. Pliable plastic mesh: Holds the shape you set it in rather than sagging into a hammock the way soft string does. Reusable season after season: Peels off, rinses and goes back up, which is where the cost per cycle drops well below string net. Flat or upright: Works as a horizontal scrog layer over hydro tables or vertically on stakes for climbing crops. Technical Specifications Specification Value SKU 740005 Material Pliable plastic Mesh Size 6 in squares Roll Size 4 ft x 16 ft Orientation Horizontal or vertical Reusable Yes Other Lengths 8 ft, 50 ft, 100 ft, 325 ft Other Width 6.5 ft