Botanicare 2x4 Rack Tray | 45.5 x 25.5 in, Fits Wire Shelving

How a Botanicare 2x4 Rack Tray Sits on a Baker's Rack The 45.5 in length is the whole point. It slides inside a standard 48 x 18 x 69 in chrome wire unit rather than perching on top of one. Width is 25.5 in and depth 3.5 in, which takes four 10 x 20 in flats across. Three trays and a reservoir fit one unit, and the tray itself weighs 6 lbs. Reading It as a 2x4 Flood Tray Before You Plumb It Plenty of growers land here searching for a 2x4 flood tray, so it pays to know what this one is. It is a runoff tray with a bulkhead recess, not a pre-drilled flood table, and that fitting is a separate part. The trough along one edge overhangs the shelf frame, pulling runoff toward the low point instead of letting it pool under the flats. Standing water on a propagation shelf is where damping off starts, so that geometry is doing real work. Material is heavy gauge ABS, the same family Botanicare runs across its tray line. Key Features 45.5 x 25.5 x 3.5 in: Sized to slide inside a standard 48 x 18 x 69 in chrome wire shelving unit. Four 10 x 20 in flats across: Three trays fit one unit alongside a reservoir, in roughly 8 sq ft of floor. Trough overhangs the shelf edge: Runoff clears the frame instead of collecting on the wire below the tray. Bulkhead recess, fitting separate: A molded low point for a drain. It is not a pre-drilled flood table. Heavy gauge ABS: The same material family Botanicare runs across its tray and reservoir line. 6 lbs empty: Light enough to lift down, rinse and reseat without breaking the rack down. Technical Specifications Specification Value Outside Dimensions 45.5 in L x 25.5 in W x 3.5 in H Weight 6 lbs Material Heavy gauge ABS Part Number 707063 Shelving Fit Standard 48 in L x 18 in D x 69 in H chrome wire Flat Capacity Four 10 x 20 in flats per tray Trays Per Unit Three, plus a reservoir Drain Bulkhead recess; fitting sold separately Runoff Path Edge trough, overhanging the shelf frame Larger Size 4 ft x 8 ft rack tray