B'Cuzz Blossom Builder Liquid 12oz

What a 0-9-19 Blossom Builder Liquid Actually Does Zero nitrogen, nine percent phosphate and nineteen percent potash. That analysis tells you most of what this bottle is for before you read anything else. No nitrogen means it will not push new leaf at a point in the cycle when leaf is not wanted. Potassium at roughly twice the phosphorus is the ratio associated with firming flowers rather than initiating them. Atami sell it as a finisher, and the analysis backs that positioning. It is an additive and not a base, so it goes into a tank that already holds a complete feed. The bottle is 12 oz, which is about 355 ml. Rate is 0.25 to 0.5 ml per litre, or roughly one to two millilitres per gallon. That works out at somewhere between 190 and 390 gallons of finished feed from this bottle. Where It Goes in the Flowering Phase, and the Rate Trap Flowering phase additives fail more often from overdosing than from anything else. The rate here is small, and it is small on purpose. Doubling a potassium heavy additive is how growers lock out calcium and magnesium. Start at the bottom of the range and hold it there unless the plant asks for more. Watch runoff conductivity rather than the leaf, because the leaf tells you too late. It stacks on top of whatever base you run, in coco, in rockwool or in a recirculating tank. Add it after the base parts are mixed and the tank is stirred, never into neat water. One practical note on sizing: the current Atami range carries this product in a 16.9 oz bottle. Anyone who only ever runs a two part base and nothing else does not need this at all. Key Features Analysis: 0-9-19, with no nitrogen at all What that means: It firms flowers rather than pushing fresh leaf Type: An additive, not a base feed Rate: 0.25 to 0.5 ml per litre, or one to two per gallon Bottle: Twelve fluid ounces, which is about 355 ml What it makes: Between 190 and 390 gallons of finished feed Stage: The flowering phase, used as a finisher Mixing: Add it after the base parts, into a stirred tank Risk: Overdosing potassium locks out calcium and magnesium Sizing note: The current Atami bottle is 16.9 oz Technical Specifications Specification Value SKU BZBB12 Brand Atami, B'Cuzz line Product Blossom Builder, liquid Guaranteed analysis 0-9-19 Nitrogen None Size 12 fl oz, about 355 ml Dose 0.25 to 0.5 ml per litre Per gallon About 1 to 2 ml per gallon Yield 190 to 390 gal of finished feed Stage Flowering, as a finisher Type Additive, used alongside a complete base Current Atami sizes 16.9 oz, 32 oz, 1.3 gal and Tabzz tablets Barcode 666884701633