AutoPot easy2Propagate Kit | Gravity Fed, 6.6 Gal FlexiTank

What Comes in the easy2Propagate Complete Kit Everything in the box has a dimension, and they decide whether it fits the bench you had in mind. The clear lid measures 49 by 24.5 by 8 in and carries four fitted vents. The garden tray beneath it is 47 by 21.5 in, which is a deliberate depth for young roots rather than a round number. Two pieces of coco matting at 23 by 20 by 1.2 in sit in that tray and do the actual watering. A root control sheet at 46 by 20 in goes between the matting and the plants. The FlexiTank holds 6.6 gal and folds flat when it is not in use. The kit uses a half inch to three eighths adaptor and 5 ft of three eighths pipe. Any extra pipe should be three eighths. The valve is an AQUAvalve5, which is worth stating because the earlier AQUAvalve is a different part and the two are not interchangeable. Shipping weight is 31 lbs in a box of 12 by 26 by 51 in, so this travels as a long flat parcel rather than a small one. How Gravity Fed Propagation Works Without a Pump This is the part that rarely gets explained, and it is the whole reason to choose the system. Nothing in this kit plugs into anything. The tank sits higher than the tray and the water comes down by gravity. An AQUAvalve sits in the tray and opens when the water in the tray drops, then closes when it is back up. Water goes in on demand rather than on a timer. The coco matting under the plants holds that water and wicks it upward by capillary action. The cuttings draw what they need rather than sitting in a flood. The root control sheet keeps roots out of the matting, which is what lets the mat be lifted and replaced between runs. Four vents in the lid are the other half of the control. Closed, the lid holds the humidity a fresh cutting needs. Opened a little at a time over several days, it hardens the cutting off gradually. The alternative is doing it all at once on the day the lid comes off. Two practical notes before anything is committed. There is no heat and no light in this kit, so a mat and a fixture are separate lines. And the tank is filled by hand, so a long propagation run still needs someone to top it up. Key Features No pump, no timer, no power: The tank feeds by gravity and the valve opens on demand. Lid 49 by 24.5 by 8 in: With four fitted vents for hardening off a stage at a time. Garden tray 47 by 21.5 in: A deliberate depth for young roots rather than a round figure. Two coco mats: At 23 by 20 by 1.2 in; they hold the water and wick it upward. Root control sheet: 46 by 20 in, so the matting can be lifted and replaced between runs. AQUAvalve5: Not the earlier AQUAvalve, which is a different and non interchangeable part. Three eighths pipe: The adaptor and pipe are both three eighths inch. No heat and no light: A heat mat and a fixture are separate items, and so is the medium. Technical Specifications Specification Value SKU APWS211 Brand AutoPot Product Gravity fed propagation kit Lid Clear, 49 x 24.5 x 8 in, with 4 fitted vents Garden tray 47 x 21.5 in Coco matting 2 pieces at 23 x 20 x 1.2 in Root control sheet 46 x 20 in Tank 6.6 gallon FlexiTank, folds flat Valve AQUAvalve5, with cover Adaptor 1/2 in to 3/8 in Click-Fit, with filter Pipe 5 ft of 3/8 in Power required None; the system is gravity fed Timer required None; the AQUAvalve works on demand Tank position Must sit higher than the tray Not included Heat mat, lighting, growing medium and plugs Shipping weight 31 lbs Shipping box 12 x 26 x 51 in